This mounting jig is specifically developed for the safe and efficient loosening of PUSH joints in IVAR ALPEX systems. Used primarily in plumbing and gas distribution applications, it ensures secure handling during disassembly tasks. Installers and service technicians working on residential and commercial systems benefit from its precision engineering and compatibility with standard IVAR components.

Typical applications include maintenance of gas supply lines, water distribution systems and sanitation networks. The tool is suitable for use in both new installations and retrofit scenarios where joint access is required for inspection or replacement. Its design supports accurate alignment and minimises the risk of damage to the joint or surrounding components during operation.

Technical parameters

Code	88320900
Brand	IVAR

The tool is designed for use with 20 mm diameter PUSH joints. It is essential to confirm the exact dimensions of the joint and surrounding components before use to ensure correct fit and function. The tool supports the mechanical principles of PUSH joint disassembly and is optimised for use with IVAR ALPEX fittings as specified by the manufacturer.

Installation and connection

Before using the mounting jig, ensure the system is depressurised and all safety precautions are followed. Position the tool securely over the PUSH joint, aligning it with the outer casing to avoid misalignment. Apply even pressure to loosen the joint without forcing or twisting the tool, which could cause damage to the fitting or piping.

Confirm the correct size of the joint before use.
Ensure the system is fully depressurised.
Use only with IVAR ALPEX PUSH joints as specified.
Avoid applying lateral force or uneven pressure during loosening.

Common installation mistakes include incorrect alignment of the tool, which can lead to damage, and attempting to use the tool on non-compatible joints. Always double-check the joint type and size before proceeding.

Compatibility and accessories

This mounting jig is compatible with IVAR ALPEX PUSH joints in 20 mm diameter. For larger diameters such as 76.1 mm, 88.9 mm and 108 mm, alternative tools are available upon request. When working on a system, ensure that all necessary tools for assembly and disassembly are available. Additional accessories such as sealing rings or replacement parts should be sourced according to the manufacturer’s recommendations.

Technical background for designers

The mounting jig operates by applying controlled mechanical force to the outer casing of the PUSH joint, allowing the internal locking mechanism to be released safely. The tool is constructed from durable materials suitable for repeated use in professional environments. Its design integrates with the push-fit technology of IVAR ALPEX fittings, ensuring minimal wear on the joint components during operation.

The material properties of the tool support long-term durability and resistance to common environmental factors encountered during installation. Correct use of the tool ensures the integrity of the system is maintained, reducing the risk of leaks or failures. Designers should consider the need for such tools when planning maintenance access points within the system layout.

Service and operation

Regular inspection of the tool for signs of wear or deformation is recommended. Ensure the tool remains free from debris and stored in a dry location when not in use. During operation, check for smooth movement and correct alignment with the joint. If any resistance is encountered, stop immediately and inspect the tool and joint for possible damage.

There are no specific service intervals provided for this tool. However, it should be withdrawn from service if any visible damage or functional issues are detected. Always follow the manufacturer’s guidelines for tool maintenance and replacement.

Frequently asked questions

Can this mounting jig be used with other brands of PUSH joints?
No, it is specifically designed for IVAR ALPEX PUSH joints. Using it with other brands may result in damage to the tool or the joint.

Is it possible to use this tool on larger diameter joints?
No, it is intended for 20 mm diameter joints. Larger diameters such as 76.1 mm, 88.9 mm and 108 mm require separate tools, which are available on request.

What should be checked before using the tool?
Before use, confirm the correct size of the joint, ensure the system is depressurised, and verify that the tool is in good condition with no signs of damage.

Can this tool be used in both horizontal and vertical positions?
Yes, the tool can be used in any orientation, provided the joint is accessible and the tool can be aligned correctly with the fitting.