O-ring GAS - 22mm (yellow) IVAR.IVO.HNBR Z

Product detailed description

This O-ring is commonly used in press-fit systems for gas applications in residential and commercial buildings. It is frequently installed in heating systems, medical equipment, and industrial gas lines. The component ensures a tight seal in press-fit connections, preventing leaks and maintaining system integrity. It is suitable for use with press-fit steel pipe systems and is often found in systems requiring a reliable and durable sealing solution.

Installers and technicians working in HVAC, industrial gas, and medical fields will find this O-ring essential for sealing press-fit connections. It is commonly used in systems where a yellow EPDM O-ring is required for compatibility with the specific media and operating conditions. The O-ring is part of a larger sealing system that includes press-fit fittings and steel pipes, ensuring a secure and long-lasting connection.

Technical parameters

Operating temperature	-20 °C
Nominal pressure	PN 10
Code	I002581
Brand	IVAR

The operating temperature range from -20°C to +85°C with a maximum of +120°C allows the O-ring to be used in a wide range of environments. The nominal pressure rating of PN 10 is important for determining the suitability of the O-ring for specific system pressures. These parameters are critical for ensuring the O-ring can perform reliably under the expected operating conditions.Installation and connection The O-ring is installed in press-fit connections and must be used with press-fit fittings and steel pipes. The press-fit system requires the use of a press tool to ensure the fitting is securely connected to the pipe. During installation, the O-ring must be positioned correctly within the fitting to ensure a proper seal. Common installation mistakes include incorrect positioning of the O-ring and failure to use the correct press tool. It is important to verify that the press-fit connection is fully engaged and that the O-ring is not damaged during installation.

Compatibility and accessories

The O-ring is compatible with press-fit fittings and steel pipes used in gas systems. It is typically used with fittings that have a press-fit connection and are designed for use with EPDM O-rings. Additional components such as press-fit fittings and steel pipes may need to be ordered separately to complete the installation.

Technical background for designers

The O-ring functions as a sealing element in press-fit connections, ensuring a tight and leak-free connection. It is made from EPDM rubber, which provides good resistance to a range of media and operating conditions. The O-ring is integrated into the press-fit system, where it is compressed between the fitting and the pipe to create a secure seal. The service life and efficiency of the O-ring are influenced by factors such as the quality of the press-fit connection, the operating conditions, and the compatibility of the media with the EPDM material.

Service and operation

The O-ring requires minimal maintenance once installed correctly. Regular inspections should be carried out to check for signs of wear, damage, or leakage. If any issues are detected, the O-ring should be replaced immediately to prevent system failure. There are no specific service intervals provided for this component, but it is recommended to follow the manufacturer's guidelines for maintenance and inspection.

Frequently asked questions

Can the O-ring be used in press-fit connections with a diameter larger than 54 mm?
No, the O-ring is only valid for press-fit connections up to 54 mm.

Is the O-ring suitable for use with gases other than those specified?
It is suitable for use with medical, industrial, and noble gases as specified in the product description.

Can the O-ring be used in systems with a temperature higher than +120°C?
No, the maximum operating temperature is +120°C as specified in the product parameters.

Is the O-ring compatible with stainless steel fittings?
Yes, the O-ring is compatible with stainless steel fittings as it is made from EPDM rubber and is designed for use with press-fit systems.