Oblique sediment filter 1/2"

Product detailed description

This oblique sediment filter is commonly used in residential and commercial plumbing systems to protect sensitive components such as taps, valves and small appliances from particulate contamination. It is typically installed vertically in water supply lines before a single point of use, such as a kitchen or bathroom sink, a washing machine inlet or a small appliance connection. The compact design allows for installation in tight spaces, and the angled orientation helps reduce flow resistance while ensuring efficient sediment capture. The filter is suitable for both new installations and retrofitting in existing systems where particulate filtration is required for the protection of downstream components.

Its brass construction ensures durability and resistance to corrosion, making it suitable for a wide range of water conditions. The filter is designed for easy cleaning via the bottom cleaning nut, allowing for quick maintenance without the need to cut or disconnect the piping. The vertical orientation and downward-facing cleaning nut ensure that sediment settles at the bottom of the filter body, facilitating efficient cleaning and reducing downtime during maintenance.

Technical parameters

Installation and connection

Installation should be carried out in a vertical orientation with the cleaning nut facing downward to allow sediment to settle at the bottom of the filter body. The G1/2 thread requires standard plumbing tools for tightening. It is important to ensure that the filter is installed in the correct direction, as specified by the manufacturer, to prevent improper sediment collection and flow disruption. A common mistake during installation is neglecting to check the orientation, which can lead to reduced filtration efficiency and increased maintenance frequency. The filter should be installed in a location that allows easy access for cleaning and inspection.

Compatibility and accessories

The filter is compatible with standard plumbing systems using G1/2 threaded connections. It is suitable for use with copper, plastic and steel piping, provided that the connections are properly sealed with thread sealant or PTFE tape. No additional accessories are required for basic installation, although a wrench may be needed for tightening the cleaning nut. The compact size and standard connection make it a versatile component for a variety of plumbing applications.

Technical background for designers

The oblique sediment filter operates by capturing particulate matter such as sand, rust and other suspended solids in the water stream. The angled design helps reduce flow resistance while ensuring that sediment settles at the bottom of the filter body. The cleaning nut allows for quick and easy maintenance without the need to disconnect the filter from the system. The filter is designed for integration into single-point water supply lines and is not intended for use in high-flow or industrial applications. The maximum operating temperature and pressure are key factors that influence the filter's performance and service life.

Service and operation

Regular inspection and cleaning are recommended to maintain optimal filtration performance. The cleaning nut can be removed to access the filter screen, which should be inspected for clogging and cleaned as necessary. The frequency of cleaning depends on the water quality and the level of particulate contamination. No specific service intervals are provided in the technical data, but it is advisable to clean the filter periodically, especially in areas with high particulate content in the water supply. During operation, it is important to ensure that the filter is not subjected to pressures or temperatures exceeding the specified limits.

Frequently asked questions

Can the filter be installed horizontally?
No, the filter must be installed vertically with the cleaning nut facing downward to ensure proper sediment collection and flow efficiency.

Is the filter suitable for hot water applications?
Yes, the filter can be used in hot water systems as it has a maximum operating temperature of 120°C.

Can the filter be used in high-pressure systems?
Yes, the filter is rated for a maximum working pressure of 1.0 MPa, making it suitable for use in standard plumbing systems.

Can the filter be cleaned without removing it from the system?
No, the filter requires the cleaning nut to be removed to access the filter screen for cleaning. The cleaning process is quick and does not require cutting the piping.