Press jaw M - M54/54mm IVAR.CEL M

Product detailed description

Press jaws are essential components in the installation of press-fitting systems used in heating, plumbing and sanitary applications. Installers and technicians working in residential, commercial and industrial buildings use these jaws to ensure secure and leak-free connections in copper and stainless steel pipe systems. The IVAR press jaw M54/54mm is specifically designed for use with IVAR.C-STEEL and IVAR.INOX fittings, which are commonly used in systems requiring high durability and corrosion resistance. These systems are often found in environments where traditional soldering or threading methods are impractical or undesirable.

Proper use of press jaws ensures that the fittings are compressed to the correct dimensions, maintaining the integrity of the connection. The M54/54mm jaw is suitable for larger diameter fittings, making it ideal for applications where higher flow rates or structural support is required. The use of electric hydraulic crimping tools with this jaw ensures consistent and reliable results, reducing the risk of installation errors and rework.

Technical parameters

Installation and connection

When installing IVAR.C-STEEL or IVAR.INOX press fittings, the press jaw must be correctly aligned with the fitting before crimping. The fitting is placed in the jaw, ensuring it is fully seated and aligned with the pipe. The electric hydraulic tool is then used to apply the required pressure, compressing the fitting around the pipe. It is important to verify that the fitting is not damaged and that the pipe is clean and free from burrs before crimping. Common installation mistakes include using the wrong jaw size, misalignment of the fitting, and insufficient or excessive crimping pressure, which can lead to leaks or system failure.

Compatibility and accessories

The IVAR press jaw M54/54mm is compatible with IVAR.POWER-PRESS and IVAR.POWER-PRESS ACC electric hydraulic crimping tools. These tools are designed for use with IVAR press-fitting systems and provide the necessary force to compress the fittings correctly. To complete the installation, the appropriate fittings and pipes must be selected according to the system requirements. Additional accessories such as pipe cutters, deburring tools and measuring instruments may also be required to ensure accurate and efficient installation.

Technical background for designers

Press jaws operate by compressing the fitting around the pipe, creating a mechanical and hydraulic seal. The IVAR.C-STEEL and IVAR.INOX systems use copper and stainless steel materials, which offer high strength and resistance to corrosion. The press jaw is designed to apply uniform pressure across the fitting, ensuring that the connection remains secure under operating conditions. The material and design of the jaw are selected to withstand repeated use and maintain dimensional accuracy over time. The efficiency of the system depends on the correct selection of jaw and fitting, as well as the proper application of crimping force.

Service and operation

Regular inspection of the press jaw is recommended to ensure it remains in good working condition. Any signs of wear, deformation or damage should be addressed immediately to prevent installation errors. The jaw should be kept clean and free from debris to maintain accurate crimping. No specific service intervals are provided in the brief, but it is advisable to follow the manufacturer's recommendations for maintenance and inspection. Proper storage and handling of the jaw will help extend its service life and ensure consistent performance.

Frequently asked questions

Can the IVAR press jaw M54/54mm be used with other IVAR press systems?
No, it is specifically designed for IVAR.C-STEEL and IVAR.INOX systems. Using it with other systems may result in improper crimping and system failure.

What type of crimping tool is required for this jaw?
The IVAR press jaw M54/54mm is compatible with IVAR.POWER-PRESS and IVAR.POWER-PRESS ACC electric hydraulic crimping tools.

Is it possible to use this jaw for smaller diameter fittings?
No, the M54/54mm jaw is specifically sized for 54mm diameter fittings. Using it for smaller fittings will not provide the correct crimp and may damage the fitting.

How can I ensure the fitting is correctly aligned before crimping?
Visually inspect the fitting and pipe to ensure they are aligned and seated correctly in the jaw. Any misalignment should be corrected before applying crimping pressure.