Cable set 4x1;5mm2 - d=20 m, with connection for 4" GG/4" OL motor DAB.PRISLUSENSTVI PCM

Product detailed description

Industrial submersible pump installations often require robust cabling solutions to ensure reliable power transmission and system longevity. This cable set is specifically designed for use with 4 inch GG and OL motors in applications where submersible pumps are used for water transfer, dewatering, or process water management. The 20m length allows for flexible installation in deep wells or large tanks, while the 4x1.5mm2 cross-section ensures sufficient current carrying capacity for standard motor operations. Installers working in industrial or commercial settings will find this cable set suitable for both new installations and replacement scenarios in pump systems.

The cable is typically used in conjunction with submersible motors that require a secure and durable electrical connection. The pre-fitted connectors simplify the installation process by eliminating the need for on-site termination, reducing the risk of connection errors and ensuring a watertight seal. The cable is suitable for environments where the motor is fully submerged and requires a reliable power supply with minimal maintenance.

Technical parameters

Code	60153539
Brand	IVAR

The cable has a cross-section of 4x1.5mm2, which is suitable for standard motor loads. The 20m length is fixed and cannot be adjusted, so the installation must account for this during planning. The conductors are arranged in four cores, allowing for three-phase operation plus a protective conductor. The pre-fitted connectors are sized for 4 inch motor interfaces, ensuring compatibility with GG and OL motor types.Installation and connection The cable set is designed for direct connection to 4 inch GG or OL motors. The installation process involves routing the cable from the motor to the control panel or power source, ensuring that the path is free from sharp bends or mechanical stress points. The pre-fitted connectors should be inspected for damage before installation, and the connection should be made in a dry and accessible location. Common installation mistakes include incorrect routing that causes mechanical strain on the cable or failure to secure the cable properly, which can lead to movement and potential damage over time. It is important to verify that the connectors are compatible with the motor's terminal block and that the cable is not exposed to excessive heat or chemical exposure.Compatibility and accessories This cable set is specifically compatible with 4 inch GG and OL motors. When ordering, ensure that the motor type matches the connector design. Additional components such as junction boxes, sealing glands, or control panels may be required depending on the system configuration. No related products are listed for this item, so it is recommended to verify all required components with the system designer or manufacturer.Technical background for designers The cable is constructed with conductors sized for standard submersible motor loads, ensuring sufficient current carrying capacity without excessive voltage drop over the 20m length. The insulation and sheathing materials are selected for their resistance to moisture and mechanical stress, making them suitable for submerged environments. The pre-fitted connectors are designed to provide a secure and watertight connection, preventing ingress of water or contaminants. The cable is intended for use in three-phase systems and includes a protective conductor for safety compliance. The design ensures that the cable can be integrated into the system without requiring additional termination or sealing measures, simplifying the installation process.Service and operation During operation, the cable should be inspected periodically for signs of mechanical damage, insulation wear, or connector loosening. Any damage to the cable or connectors should be addressed immediately to prevent electrical faults or system failure. The cable is not designed for frequent disconnection or reconnection, so it should be treated as a permanent installation component. No specific service intervals are provided in the brief, but regular visual inspections are recommended as part of routine maintenance procedures.Frequently asked questions

Can this cable set be used with 3 inch motors?
No, the connectors are specifically sized for 4 inch GG or OL motors and are not compatible with smaller motor types.

Is the cable suitable for three-phase operation?
Yes, the 4-core configuration includes three phase conductors and a protective conductor, making it suitable for three-phase motor connections.

Can the cable length be adjusted?
No, the 20m length is fixed and cannot be modified. The installation must be planned to accommodate this length without unnecessary slack or tension.

Are the connectors watertight?
Yes, the connectors are designed to provide a secure and watertight connection suitable for submerged environments, ensuring long-term reliability.