SAFE 808L flammable gas detector
Code: TI_08831463Product detailed description
SAFE 808L flammable gas detectorFlammable Gas Detector - Measuring Equipment - Model SAFE 808L
Intelligent flammable and explosive gas detector with voice alert and digital display. The device has been designed for detection and early warning of flammable and explosive gases (natural gas, methane, propane, butane) using the latest catalytic combustion sensor technology that does not require additional calibrations.
The SAFE - 808L digital detector is ideally suited for the detection of gas leaks from all domestic gas appliances and gas boilers. It detects all combustible gases commonly found in households.
The device is powered from 230V/AC mains with a 9V NiMH battery backup in case of mains power failure (battery not included).
Beyond the usual functions, this device stands out with completely new features that make it the absolute market leader in its category.
Function test:
The device is equipped with a test function, which serves to artificially simulate the presence of gas and allows the operability of the internal circuits to be verified through an automatic efficiency monitoring system.
Digital display:
Displays the combustible gas values in ppm (millionths). The digital display allows the recognition and comparison of low and high values of the potential hazard.
Voice alert function:
The acoustic signal of the alarm siren is accompanied by a human voice (in Czech language) informing about the detected danger "PLEASE ATTENTION!, GAS LEAK!".
Where to install the detector:
Flammable and explosive gas detectors are installed in rooms with potential gas leakage (gas boiler rooms, kitchens, rooms with hot tubs, karma, straight pipes, thermometers, etc.). The basic criterion for the correct placement of the detector is the identification of the gas, i.e. whether we will detect light gas (rising up to the ceiling) or heavy gas (falling to the floor). According to this criterion we will choose the installation location. We always install the gas detector on the wall, depending on the type of gas detected, either below the ceiling (approx. 15-30 cm) or above the floor (approx. 15-30 cm), at a distance of at least 1.2 m from the fuel-burning appliance to minimize false alarms that may occur during a short gas leak, for example, when igniting a gas boiler or stove, and at a distance of approx. 60 cm from the corners, i.e. the point where the two walls converge.
Properties of gases and their mass relative to air:
Propane butane (LPG): heavier than air, sinks to the floor.
Natural gas (LNG, CNG): lighter than air, rising up to the ceiling.
Petroleum substances: heavier than air, sink to the floor.
Ethylene: Lighter than air, rises up to the ceiling.
What is natural gas?
Natural gas is piped into your house. If you don't live in the country, you probably use natural gas. It's the predominant energy for home heating. Natural gas is a fossil fuel containing almost exclusively methane. Methane is much lighter than air and rises upward when it escapes.
If you are a natural gas user, we recommend installing this detection device about 30 cm from the ceiling to ensure that gas leaks are detected as quickly as possible.
What is propane? Propane is most often delivered to the home in liquid form and is stored near the home in propane tanks. Propane is used in homes in rural areas where natural gas is not piped in. Since propane is the most commonly used LPG (liquefied petroleum gas), the terms for pan and LPG are often used with the same meaning. Unlike natural gas, propane is much heavier than air and stays low to the ground. It is therefore recommended that this detection device be installed low to the floor to ensure that a gas leak is caught as quickly as possible.
It is therefore important to protect your family and home with combustible gas detectors.
Features:
- Unique equipment for the detection of flammable gases.
- Voice warning - a human voice informs about the detected danger.
- Very reliable detection method via catalytic combustion sensor.
- Display gas concentration on the display in units of ppm.
- Powered from AC 90V-240V mains.
- Backup power supply with rechargeable 9V NiMH battery in case of power failure.
- Intelligent detection control by microprocessor.
- Information and warning LED indication.
- Function test, verifying the correct functioning of the device.
- Self-monitoring detection system with automatic sensor failure indication.
- Digital display for displaying measured values.
- Loud alarm signaling
- Installation on the wall
- Low battery and sensor fault indication
- Low operating costs, small size and weight
- Easy assembly and handling
- Modern and elegant design
This combustible gas detector has a certificate confirming compliance with the requirements of the Slovak technical standard STN-EN 50194-1: 2009, Electrical apparatus for the detection of combustible gases in residential buildings. Compliance with this standard has been confirmed by an independent research laboratory TCT (Testing Certification Technology).
Technical parameters:
- Detection method: catalytic combustion
- Sensor sensitivity: 2500ppm +/- 1500PPM (0.25% DMV/LEL)
- Alarm: 2500ppm (0.25% DMV/LEL)
- Initialization time: 180 s
- Response time: Max. 20 s
- Mains power: AC 230 V / 50-60 Hz
- Backup power: NiMH battery 9V (optional - battery not included)
- Run time on battery backup: 2 h operating mode / 30 min alarm
signalling:
Sound signaling: 85 dB / 0.3 m
Exceeding the permissible concentration: 85 dB acoustic alarm accompanied by a voice warning "PLEASE BEWARE!, GAS LEAK!" And a visual indication by a red LED, an indication on the display of the detected concentration.
LED indication:
AC power supply: green LED permanently lit
Alarm: rapid flashing of the red LED
Fault: the yellow LED is permanently lit
Mounting method: On the wall (screws included)
Coverage: IP 30
Working temperature: 0°C to +50°C
Working relative humidity: 10%-95%.
Storage temperature: -10°C to 50°C
Dimensions: 112 x 73 x 42 mm
Supply cable length: approx. 1.35 m
Approval: 50194-1:2009
Marks: CE
Warranty: 24 months
Additional parameters
| Category: | Gas leak detectors |
|---|---|
| EAN: | 703123016308 |
| EAN: | 703123016308 |
Be the first who will post an article to this item!
Add a comment
