Set for photovoltaic water heating GETI GWH02D 2250Wp 5x PV TRINA

Product detailed description

Kit for easy installation of water heating in boilers and other installations. The kit consists of 5 Trina Solar TSM-NEG9R.28 panels, Vertex S+ Dual Glass N-Type 450 W/panel, GETI GWH02D 4000 W controller and 25 meters of cabling with MC4 connectors included. The inverter features a large clear LED display, 3m temperature sensor and independent temperature setting for both PV and AC mains water heating. It has a forced heating function and is compatible with most boilers on the market.
The system is simple , it only requires the connection of the appropriate number of PV panels with a maximum output of 4000 W with an operating voltage of 160 ~ 350 V DC, a mains voltage of 230 C AC and the connection of a resistive load, e.g. a heater, an electric boiler, an electric radiator or underfloor heating, and circuit breakers. The DC current generated in the panels, which cannot be fed directly to the heating equipment, is converted into AC current in the inverter, which can be used to power the heating equipment.

The maximum power of the system is 4 000 W. The inverter has a priority input from the photovoltaic panels and in case of a power shortage on these panels, the system is backed up with 230 V AC from the grid.

Product parameters:

- Solar inverter for hot water heating using resistive loads (heating element, boiler).
- Temperature sensor
- separate temperature setting for water heating from photovoltaic or AC grid
- automatic switching between networks (PV / 230V AC network)
- operating modes: PV only as an island system or or automatic mode PV + grid
- quiet operation for passive cooling
- efficient monitoring of maximum panel performance using MPPT
- high efficiency > 99%

The GETI GWH02D inverter is equipped with a clear LED display that informs the user of the current and set values:

- Indication of water heating from PV panels
- 230 V AC mains water heating indication
- Current and set water temperature (PV,AC)
- PV power
- PV voltage
- indication of comparison
- error status indication


Technical parameters:

- Input Voltage (VDC): 160 to 350 (VDC)
- Input voltage (VAC): 230 V AC
- output voltage [VAC]: 0-260 VAC (VAC)
- Maximum power: 4000 W
- PV input current: 20 A max.
- 20A max.
- Load type: resistive with bimetal thermostat (not suitable for electronically controlled thermostats!)
- The value of the resistive load shall not be less than 13 Ohm
- MPPT function: YES
- PV panel connection: series or series-parallel
- Priority input: PV panels
- backup input: mains 230 V AC
- operating temperature: -25 °C ~ +55 °C
- efficiency: > 99%
- Length of temperature sensor: 3 m
- cooling: passive
- short-circuit protection at the input
- overheating protection
- PV panel input connection: connectors MC4
- Input connection 230 V AC: screw terminal
- Output connection 230 V AC: screw terminal
- Material: aluminium + metal
- degree of protection: IP65
- Dimensions l x w x h [mm]: 255 x 201 x 95 mm
- weight: 3 kg

Trina Solar photovoltaic panel TSM-NEG9R.28, Vertex S+ Dual Glass N-Type

Technical parameters:

- Nominal power: 450 W
- type: type N, Topcon, monocrystalline
- module efficiency: 22.5%
- maximum current (Imp): 10.09 A
- maximum supply voltage (Vmp): 44.6 V
- voltage at no-load (Voc): 52.9 V
- short-circuit current (ISC): 10.74 A
- Maximum system voltage: 1500 VDC (IEC)
- Connector type: compatible with MC4/MC4
- Front glass: 1.6 mm heat-reinforced high-transparency glass
- degree of protection: IP68.
- Number of articles: 144.
- Dimensions: 1762 x 1134 x 30 mm
- weight: 21 kg
- frame: anodised aluminium alloy
- frame colour: black

ATTENTION! The system is designed for resistive loads only.

Warning! The installation of the solar system may only be carried out by a suitably qualified person!

The kit includes:
Photovoltaic panels - 5 pcs Trina Solar TSM-NEG9R.28, Vertex S+ Dual Glass N-Type
Solar controller GETI GWH02D
Cable set 25 m
MC4 connectors
Installation instructions

Note: The GETI GWH inverter is only suitable for resistive loads with bimetal thermostat (not suitable for electronically controlled thermostats!).
The inverter output (L, N) must not be connected to mains or earth! The inverter output must not be connected to a TN-C system.

- For oversized goods, the delivery time from the creation of the order may be extended by 3-4 working days.