T-piece press - reduced, 50 x 26 x 50

Product detailed description

This press T-piece is commonly used in residential and commercial heating and plumbing systems where a branch connection is needed. It allows the installation of a secondary pipe from the main line without the need for additional valves or fittings. The fitting is ideal for use in underfloor heating, domestic hot water systems, and central heating circuits. It is designed for use with ALPEX pipes, which are known for their flexibility and durability in hydronic systems.

Installers and technicians working in new builds or renovation projects will find this T-piece useful for creating T-junctions in pipe runs. The fitting is suitable for use in systems where different pipe diameters need to be connected. It ensures a secure and leak-free connection when properly installed with the correct pressing tools and accessories.

Technical parameters

Installation and connection

Installation of this press T-piece requires the use of compatible pressing tools and dies. The fitting is connected to ALPEX pipes by inserting the pipe into the fitting and pressing the connection with the appropriate tool. The connection sizes are 50 mm, 26 mm, and 50 mm, allowing for a reduced branch connection. The installer must ensure that the pipe ends are clean and free from burrs before pressing.

Common installation mistakes include using incorrect pressing tools or not verifying the correct die type. The fitting is compatible with B-F-TH type clamping tools. It is important to check that the pressing tool is set to the correct position and that the press mark is fully formed. Failure to do so can result in a weak or leak-prone connection.

Compatibility and accessories

This press T-piece is specifically designed for use with ALPEX pipes. It is compatible with standard pressing systems and requires a stainless steel clamping ring and EPDM sealing ring for a secure connection. The fitting is suitable for use with pressing tools of type B-F-TH. When ordering, ensure that the necessary pressing tools and dies are available for the specified dimensions.

Technical background for designers

The press T-piece operates by forming a mechanical and hydraulic seal between the pipe and the fitting. The nickel-plated brass CW617N material offers good resistance to corrosion and mechanical stress, making it suitable for long-term use in hydronic systems. The EPDM sealing ring ensures a watertight connection and is compatible with the thermal expansion of the pipe material. The fitting is integrated into the system by creating a branch connection, which allows for the distribution of media to different parts of the installation.

The service life of the fitting is influenced by the quality of the pressing process and the operating conditions of the system. Proper installation and the use of compatible materials ensure long-term performance and efficiency. The fitting is suitable for use in systems with a maximum operating temperature of +120°C and a nominal pressure of PN 10.

Service and operation

Once installed, the press T-piece requires minimal maintenance. There are no service intervals specified for this fitting. However, it is important to periodically inspect the connection for signs of leakage or damage. If any issues are detected, the fitting should be replaced. The nickel-plated brass material provides good resistance to corrosion, reducing the need for frequent maintenance.

Frequently asked questions

Can this T-piece be used with other types of pipe besides ALPEX?
No, this fitting is specifically designed for use with ALPEX pipes and requires the correct pressing tools for a secure connection.

What pressing tools are required for installation?
The fitting is compatible with pressing tools of type B-F-TH. Ensure that the correct dies are used for the specified dimensions.

Is it possible to reuse the fitting after pressing?
No, once the fitting has been pressed, it cannot be reused. A new fitting must be installed in case of damage or failure.

What is the maximum operating temperature for this fitting?
The fitting is rated for a maximum operating temperature of +120°C, making it suitable for hot water and heating systems.