UNI-T UT196 multimeter

Product detailed description

The UT196 True RMS Solar Multimeter from UNI-T is a professional product for professionals installing or maintaining photovoltaic or wind power plants. The design of the instrument allows it to work in harsh outdoor environments - it has IP65 protection and is able to withstand a fall from a height of 2m. This multimeter measures DC voltages up to 1700 V, AC voltages (actual rms values) up to 1500 V at a frequency range of 45 to 1000 Hz. With the UT-CS09D Flex's additional current loop, it also allows non-contact measurement of AC currents from 1.5 to 3000 A, even in confined spaces. The UT196 also measures frequency, resistance, capacitance, semiconductor transitions and circuit continuity. The low-pass function allows filtering out RF interference generated by the inverter. The low impedance mode can help troubleshoot sensitive circuits as well as circuits that may contain spurious voltages. A built-in flashlight, bright backlight, and audible and visual alarms allow users to complete work safely and efficiently even in dark and noisy environments. The UT196 solar digital multimeter is designed with 1700V DC, 1500Vrms AC overload protection and tested for safe use in CAT III 1000V, CAT IV 600V environments and certified to CE, UKCA, cETLus. Product Parameters : - multifunction multimeter with focus on outdoor and indoor installation of photovoltaic and wind power plants - measurement of AC/DC voltage, resistance, capacitance, frequency, diodes, circuit continuity, with external current loop and AC current - display: LCD, dual, backlit - maximum display value: ±6000, refresh rate 2 to 3 times per second - analogue bar graph: yes, 31 segments, measurement speed 30 times per second - range switching: automatic/manual - automatic AC/DC voltage identification: yes - non-contact field measurement (NCV): yes - diode (semiconductor junction) test: yes, open circuit voltage approx. 3V - circuit continuity test: yes, the circuit is considered closed at R less than or equal to 10 Ohm, then the buzzer beeps - built-in frequency low pass filter (LPF): yes, when the LPF is on, interfering voltage above 1.2kHz is attenuated with an attenuation greater than or equal to -3dB relative to 60 Hz. - relative mode measurement: yes - peak Hold: yes - display freeze (Data Hold): yes - max/Min mode: yes - power supply: 9V, 6F22 battery - low battery indication: yes, when voltage drops below <7.5V - automatic shutdown when idle: yes, after 15 minutes - built-in flashlight: yes - audible and visual indication: yes Technical parameters : DC Voltage Measurement (V): Range / Resolution / Accuracy 600.0mV / 0.1mV / ±(0.5%+5) 6.000V / 0.001V / ±(0.2%+5) 60.00V / 0.01V / ±(0.2%+5) 600.0V / 0.1V / ±(0.2%+5) 1700V / 1V / ±(0.2%+5) The input impedance on the mV/DC range is about 1GOhm. AC Voltage Measurement (V): Range / Resolution / Accuracy 600.0mV / 0.1mV / 45Hz to 500Hz: ±(0.8%+3); 500Hz to 1kHz: ±(1.8%+3) 6.000V / 0.001V / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3) 60.00V / 0.01V / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3) 600.0V / 0.1V / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3) 1500V / 1V / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3) Input impedance on the mV/AC range is about 10MOhm. Auto AC/DC voltage measurement: auto range / Resolution / Accuracy 0V to 600.0V / 0.1V / DC to 500Hz: ± (2.0%+3); 500Hz to 1kHz: ± (4.0%+3) With automatic range selection, LPF, Peak Hold, input impedance is 2MOhm is not selectable. Resistance Measurement: Range / Resolution / Accuracy 600.0 Ohm / 0.1 Ohm /± (1.0%+2) 6,000 kOhm / 1 Ohm / ± (0.8%+2) 60.00 kOhm / 10 Ohm / ± (0.8%+2) 600.0 kOhm / 100 Ohm / ± (0.8%+2) 6,000 MOhm / 1 kOhm / ± (1.2%+3) 60.00 MOhm / 10 kOhm / ± (2.5%+5) Capacitance Measurement: Range / Resolution / Accuracy 60.00nF / 0.01nF / in REL mode: ± (3%+10) 600.0nF / 0.1nF / ± (1.9%+5) 6,000µF / 0.001µF / ± (1.9%+5) 60.00µF / 0.01µF / ± (1.9%+5) 600.0µF / 0.1µF / ± (1.9%+5) 6,000mF / 0,001mF / ± (5%+5) 60.00mF / 0.01mF / ± (5%+5) UT-CS09D Flex AC Current Loop Measurement: Range / Resolution / Accuracy 30.00A / 0.01A / ± (0.8%+8) 300.0A / 0.1A / ± (0.8%+8) 3000A / 1A / ± (0.8%+8) Frequency Measurement: Range / Resolution / Accuracy 60.00Hz to 1,000MHz / 0.1Hz to 0.001MHz / ± (0.08% +4) Other Parameters : - operating Temperature: 0°C to 40°C (32°F - 104°F) - storage temperature: -10°C to +50°C (14°F - 122°F) - relative humidity: less than or equal to 75% RH (0°C - 30°C), less than or equal to 50% RH (30°C - 40°C) - operating altitude: less than or equal to 2000m - eMC immunity: in accordance with EN61326-1: 2013, EN61326-2-2: 2013 - power supply: 9V 6F22 battery - external dimensions: 195 x 95 x 58 mm - weight: 485g - iP protection: IP65 - drop test: 2m - certification: CE, UKCA, cETLus (CAT III 1000V, CAT IV 600V) - eN61010-1, EN61010-2-033, EN/IEC 61010-031 Contents of individual packaging : - uT196 Solar PRO multimeter: 1 pc - test cables: 1 pair - 9V/ 6F22 battery: 1 pc - user manual: 1pc