Ball cap gas FUTURGAS - 5/4 "MF; butterfly FIV.80014 M

Product detailed description

Ball valves like the IVAR FIV.80014 M are commonly used in gas distribution systems in residential and commercial buildings. Installers working on gas supply lines, heating systems or industrial gas applications will find this valve suitable for its plenum-flow design and robust construction. The valve is intended for use in systems where a tight shut-off is required, with minimal pressure drop across the valve. Its dual-threaded design allows for secure installation in both ends of the pipeline, ensuring alignment and reducing leakage risks. The operating temperature range makes it suitable for environments with cold ambient conditions, such as unheated utility rooms or outdoor installations.

When selecting a valve for a specific installation, it is important to consider the system's pressure and temperature requirements. The FIV.80014 M is rated for PN 5, which means it is suitable for low-pressure gas systems. The operating temperature range from -20°C to +60°C ensures functionality in a variety of climates and system conditions. The plenum-flow design allows for full flow capacity when the valve is open, minimising flow resistance and energy loss in the system.

Technical parameters

Material	Nickel-plated brass CW617N
Operating temperature	-20 °C
Nominal pressure	PN 5
Weight	0.728 kg
Code	80014115
Brand	IVAR

The technical parameters of the IVAR FIV.80014 M are essential for proper system integration. The PN 5 rating indicates the valve is suitable for low-pressure gas systems, while the operating temperature range from -20°C to +60°C ensures it can function in a wide range of environmental conditions. The nickel-plated brass CW617N material provides corrosion resistance and durability, making it suitable for long-term use in gas applications.

Installation and connection

The FIV.80014 M is equipped with a 5/4 inch male-female thread, allowing for secure and leak-free installation in both ends of the pipeline. The dual-threaded design ensures that the valve is aligned correctly during installation, reducing the risk of misalignment and leakage. Installers should ensure that the threads are clean and free from debris before tightening the connections. A common mistake is over-tightening the valve, which can damage the sealing surfaces or cause thread deformation. It is also important to verify that the valve is installed in the correct orientation, with the flow direction matching the system's design.

Compatibility and accessories

The IVAR FIV.80014 M is compatible with standard gas piping systems that use 5/4 inch threaded connections. It is suitable for use with low-pressure gas systems operating within the specified temperature range. No additional accessories are required for installation, as the valve is designed for direct connection to the pipeline. It is important to ensure that the system's pressure and temperature conditions are within the valve's specifications to avoid premature failure or performance issues.

Technical background for designers

The FIV.80014 M is a ball valve with a plenum-flow design, which allows for full flow capacity when the valve is open. The ball is constructed from nickel-plated brass CW617N, a material known for its corrosion resistance and mechanical strength. The valve is designed for integration into low-pressure gas systems, where it provides a reliable shut-off function. The operating temperature range and pressure rating are key factors that influence the valve's service life and efficiency. Proper system design, including correct sizing and installation, is essential to ensure optimal performance and longevity.

Service and operation

The IVAR FIV.80014 M requires minimal maintenance due to its robust construction and simple design. Regular visual inspections should be carried out to check for signs of corrosion, leakage or mechanical damage. The valve should be operated periodically to ensure smooth movement of the ball and prevent seizing. No specific service intervals are required for this model, but it is recommended to inspect the valve during routine system maintenance. If any issues are detected, such as leakage or difficulty in operation, the valve should be replaced to maintain system integrity.

Frequently asked questions

Can the IVAR FIV.80014 M be used in high-pressure gas systems?
No, the valve is rated for PN 5 and is not suitable for high-pressure applications. It is designed for low-pressure gas systems only.

Is the IVAR FIV.80014 M suitable for outdoor installations?
Yes, the valve can be used in outdoor installations as long as the operating temperature remains within the specified range of -20°C to +60°C.

Can the valve be used for water applications?
No, the valve is specifically designed for gas systems. It is not rated for water use and should not be used in plumbing or irrigation systems.

Can the valve be installed in any orientation?
No, the valve should be installed in the correct orientation with the flow direction matching the system design to ensure proper operation and prevent leakage.