Ball valve gas FUTURGAS, 3/8" FF - lever

Product detailed description

Gas ball valves are essential components in residential and commercial gas systems. They are commonly used in gas supply lines for kitchens, heating appliances, and industrial gas applications. Installers and technicians rely on these valves to ensure safe and efficient operation by providing a tight seal when closed. This model is intended for use in low-pressure gas systems and is selected based on its compatibility with the system’s pressure and temperature requirements.

The valve is installed in systems where a manual shut-off is required for maintenance, repairs, or emergency isolation. It is often part of gas distribution lines and is positioned near appliances or at branch points to allow local control. The internal thread allows for secure and leak-free connections using standard pipe fittings. Correct installation is critical to prevent gas leaks and ensure long-term performance.

Technical parameters

Material	Nickel-plated brass CW617N
Operating temperature	-20 °C
Nominal pressure	PN 5
Weight	0.144 kg
Code	80010038
Brand	IVAR

The valve is rated for a nominal pressure of PN 5 and is suitable for gas systems operating within a temperature range from -20 °C to +60 °C. These parameters influence the valve’s suitability for specific applications and should be considered during system design and component selection. The material, nickel-plated brass, provides resistance to corrosion and wear, making it appropriate for indoor gas installations.

Installation and connection

To install the valve, first ensure the system is depressurised and all connections are clean. Apply a suitable sealing compound or tape to the internal thread to prevent leaks. Insert the valve into the pipeline and tighten the fittings using an appropriate wrench. Check that the lever handle moves freely and that the valve operates smoothly without resistance. Common installation errors include over-tightening the fittings, which can damage the threads, or failing to align the flow direction correctly. Always verify the system’s pressure and temperature conditions match the valve’s specifications before commissioning.

Compatibility and accessories

This valve is compatible with standard gas piping systems using internal thread connections. For complete installation, additional fittings such as elbows, reducers or unions may be required depending on the system layout. No related products are specified for this model.

Technical background for designers

The ball valve operates via a rotating ball with a central hole that allows or blocks the flow of gas when aligned or perpendicular to the flow direction. The nickel-plated brass body ensures durability and resistance to corrosion in indoor environments. The internal thread connection provides a secure fit when paired with compatible pipe fittings. The lever handle offers a mechanical advantage for smooth operation. The valve’s performance is influenced by the quality of the sealing surfaces and the integrity of the internal thread. Proper integration into the system requires alignment with the flow direction and adherence to pressure and temperature limits.

Service and operation

Routine inspection should include checking for gas leaks around the connections and ensuring the lever handle operates smoothly. No scheduled service intervals are specified for this model. If the valve becomes difficult to operate, disassembly and cleaning may be necessary. Always isolate the system before performing any maintenance to ensure safety.

Frequently asked questions

Can the valve be used for water applications?
According to the manufacturer's technical data sheet, the valve is primarily designed for gas systems and its suitability for water applications is not specified.

What is the maximum operating temperature for gas?
The valve is rated for gas systems with a maximum operating temperature of +60 °C.

Is the lever handle removable or adjustable?
There is no information provided regarding the removability or adjustability of the lever handle.

Can the valve be used in high-pressure gas systems?
The valve is rated for nominal pressure PN 5 and is not suitable for high-pressure gas systems according to the manufacturer's technical data sheet.