This CO concentration detector is designed for installation in residential heating systems where continuous monitoring of carbon monoxide levels is required. It is commonly used in systems with gas-fired boilers, stoves or other combustion appliances where CO accumulation could pose a risk. The detector is suitable for installation in utility rooms, boiler houses or other areas where combustion equipment is located. It is intended for use by installers and service technicians who need to integrate safety monitoring into heating systems.

The device operates as part of a safety system that can trigger control functions such as shutting down a boiler or activating ventilation. It is typically installed in environments where CO may be present due to incomplete combustion. The detector must be mounted in a location that allows it to detect CO effectively without being obstructed by furniture or other objects. It is not suitable for outdoor or high-humidity environments.

Technical parameters

EAN	8031025102341
Weight	0.211 kg
Code	RGDCK5MP1S
Brand	IVAR

The detector is powered by 230 V and features a control output for 230 V actuators. The alarm threshold is set at 30 ppm CO over a 120-minute period. The IP42 rating means it is protected against solid objects larger than 1 mm and splashing . The electrochemical has a service life of 5 years and must be replaced at this interval. These parameters are essential for ensuring the device is correctly sized for the application and integrated into the control system.

Installation and connection

The detector is mounted on a wall or surface using standard fixing methods. The control output is connected to a 230 V load such as a or fan. The must be connected to a dedicated 230 V circuit. During installation, the mounting location should be checked to ensure it is free from direct heat sources and air currents that could affect CO detection. A common mistake is installing the device too close to a combustion appliance, which can lead to false alarms or delayed response.

Compatibility and accessories

The detector is compatible with 230 V electrical systems and can be integrated with solenoid valves, fans or other 230 V actuators. No additional accessories are required for basic operation. The electrochemical sensor is replaceable and must be ordered separately once the 5-year service life is reached. No related products are available for this model.

Technical background for designers

The device uses an electrochemical sensor to detect CO levels. The sensor generates a signal proportional to the concentration of CO in the air. The processes this signal and compares it to the alarm threshold. The IP42 housing protects the internal components from dust and splashing water. The control output is designed to operate 230 V loads directly. The service life of the sensor is affected by exposure to high CO levels, humidity and extremes. The device must be integrated into the overall safety system to ensure it can trigger appropriate responses when CO levels exceed the threshold.

Service and operation

The electrochemical sensor must be replaced every 5 years to maintain accurate CO detection. The device includes a diagnostic system to check its functionality. No regular maintenance is required beyond sensor replacement. During service, the power supply and control connections should be checked for continuity and correct operation. The device should be tested periodically to ensure it responds correctly to CO levels.

Frequently asked questions

Can the IVAR RGDCK5MP1S be connected to a 230 V solenoid valve?
Yes, the device has a 230 V control output that can be used to operate solenoid valves, fans or other actuators.

How long does the electrochemical sensor last?
The sensor has a service life of 5 years and must be replaced at this interval to maintain accurate CO detection.

Can the alarm threshold be adjusted?
No, the alarm threshold is fixed at 30 ppm CO over 120 minutes according to the manufacturer's specifications.

Is the device suitable for outdoor installation?
No, the IP42 rating means it is only suitable for indoor use in dry environments.