Cross, 6/4"

Product detailed description

This brass cross fitting is commonly used in residential and commercial plumbing and heating systems to connect four pipe lines at a single point. It is particularly suited for installations where a reliable and durable connection is required under moderate pressure and temperature conditions. The fitting is ideal for use in water supply lines, heating circuits, and other systems where potable water is transported. The CW617N brass material ensures compatibility with drinking water standards, making it suitable for use in systems where water quality is a priority.

Installers and technicians often use this cross fitting in systems where multiple branch lines need to be connected to a central pipe. It is commonly found in bathroom and kitchen plumbing, underfloor heating systems, and in industrial applications where a compact and robust connection is required. The fitting is designed for straightforward installation and long-term reliability in a range of environments.

Technical parameters

Installation and connection

Installation of the IVAR 1580G08080808 cross requires precise alignment of the four pipe lines. The fitting is available in a 6/4 inch configuration, meaning it connects a 6 inch pipe to four 4 inch lines. Prior to installation, ensure that all pipe ends are clean and free from debris. Apply a suitable pipe thread sealant to the male threads before screwing the fitting into place. A torque wrench may be used to ensure consistent tightening and prevent over-tightening, which can damage the threads or the fitting itself.

Common installation mistakes include using the wrong thread sealant, which can lead to leaks or corrosion, and failing to check the alignment of the connected pipes. Always verify that the fitting is fully seated and that all connections are secure. After installation, a pressure test should be performed to confirm the integrity of the joint.

Compatibility and accessories

This cross fitting is compatible with standard brass and copper piping systems. It is typically used in conjunction with pipe unions, valves, and other fittings to create a complete piping network. When installing, ensure that all connected components are rated for the same pressure and temperature conditions. Additional components such as pipe unions or isolation valves may be required to facilitate maintenance and system control.

Technical background for designers

The IVAR 1580G08080808 cross operates as a four-way connection point in a piping system. The CW617N brass material is known for its high corrosion resistance and mechanical strength, making it suitable for long-term use in water and heating systems. The design allows for even distribution of flow across all four branches, ensuring balanced system performance. The material's compatibility with potable water ensures that the fitting does not introduce contaminants into the system. The nominal pressure and temperature ratings are critical for ensuring the fitting's longevity and reliability under operational conditions.

Service and operation

Regular inspection of the fitting is recommended to ensure there are no signs of leakage or corrosion. If the system is used for hot water, it is important to check the integrity of the sealant and the tightness of the connections periodically. No specific service intervals are provided in the brief, but any visible damage or signs of wear should be addressed immediately to prevent system failure. In the event of a leak, the fitting should be isolated and replaced if necessary.

Frequently asked questions

Can the IVAR 1580G08080808 cross be used in a hot water system?
Yes, the fitting is rated for a maximum operating temperature of +120°C, making it suitable for hot water and heating applications.

Is the CW617N brass material compatible with drinking water?
Yes, the material is certified for potable water use, ensuring compliance with relevant standards for water quality.

What is the nominal pressure rating of the fitting?
The fitting is rated for a nominal pressure of PN 10, making it suitable for moderate-pressure applications in plumbing and heating systems.

Can the fitting be used with copper piping?
Yes, the brass cross is compatible with copper piping systems, provided that the threads are properly sealed and the connections are correctly aligned.