End piece, 6/4" M; 40

Product detailed description

End pieces are essential components in plumbing and heating systems where flexible hose connections are required. These fittings are commonly used in residential and commercial buildings for connecting hoses to various systems such as water supply lines, heating circuits, or irrigation setups. Installers and technicians working in these environments often encounter situations where a secure and leak-free connection is critical. This end piece is designed for internal thread connections and is suitable for use in systems operating at elevated temperatures.

When installing this end piece, it is important to ensure that the internal thread is clean and undamaged. The fitting is intended for use with hoses that have a compatible external thread. The nominal pressure rating and operating temperature range are key factors in determining the suitability of the fitting for a specific application. The brass material provides good corrosion resistance and mechanical strength, making it suitable for long-term use in water-based systems.

Technical parameters

Material	Brass CW617N ATEST for potable water
Operating temperature	+120 °C
Nominal pressure	PN 10
Weight	0.202 kg
Code	853040040
Brand	IVAR

The nominal pressure rating of PN 10 indicates that the fitting is suitable for systems operating at pressures up to 10 bar. The operating temperature of +120 °C means that the fitting can be used in systems where heated water or other media are present. These parameters are essential for determining the correct sizing and selection of the fitting to ensure safe and reliable operation in the intended application.Installation and connection To install this end piece, first ensure that the internal thread on the pipe or component is clean and free from debris. Apply a suitable thread sealant or tape to the male thread of the end piece to ensure a watertight connection. Carefully screw the end piece into the internal thread until it is fully seated. Avoid over-tightening, as this can damage the threads or the fitting itself. After installation, check for any signs of leakage by running water through the system and inspecting the connection for drips or wetness. Common installation mistakes include using the wrong type of thread sealant, not cleaning the threads properly, or attempting to connect incompatible thread sizes.Compatibility and accessories This end piece is designed to connect to hoses with a compatible external thread. It is suitable for use with systems operating at a nominal pressure of PN 10 and temperatures up to 120 °C. When ordering, ensure that the hose and other components in the system are also rated for the same pressure and temperature conditions. Additional components such as hose clamps or sealing rings may be required to ensure a secure and leak-free connection.Technical background for designers The end piece functions as a threaded connection point for hoses in plumbing and heating systems. The brass material (CW617N) provides good mechanical strength and resistance to corrosion, making it suitable for use in water-based systems. The operating temperature range and nominal pressure rating are key factors in determining the suitability of the fitting for a specific application. The design of the fitting allows for a secure and reliable connection, ensuring that the system operates efficiently and without leaks. The material properties and dimensional specifications are important for ensuring compatibility with other components in the system and for maintaining long-term performance.Service and operation During operation, it is important to periodically inspect the connection for signs of wear, corrosion, or leakage. If any issues are detected, the fitting should be replaced to prevent further damage to the system. No specific service intervals are provided, but regular maintenance is recommended to ensure continued performance. In the event of a leak, the system should be shut down and the connection inspected for damage or improper installation.Frequently asked questions

Can this end piece be connected to a hose with an external thread?
Yes, this end piece is designed for connection to a hose with a compatible external thread. Ensure that the thread sizes match and that a suitable sealant is used to prevent leaks.

Is this fitting suitable for use with potable water?
Yes, the brass material (CW617N) is approved for use with potable water, making it suitable for applications where drinking water is transported.

Can this end piece be used in systems operating at high temperatures?
Yes, the operating temperature of +120 °C makes this fitting suitable for use in systems where heated water or other media are present.

What is the maximum pressure that this fitting can handle?
The nominal pressure rating of PN 10 indicates that the fitting is suitable for systems operating at pressures up to 10 bar.