Energy accumulator VOLT SLIM ULTRA 5 51,2V 100Ah 100A

Product detailed description

The SLIM ULTRA-5 51.2 V 100 Ah 100 A battery is designed to store the energy produced by a photovoltaic installation.

LINK TO SOFTWARE - http://voltpolska.pl/PBmsLVTools_V1.38_20241212.rar

They work by storing and then releasing electricity at the right moment. The sun does not shine 24 hours a day and in most homes energy consumption is highest in the morning and evening when there is the least sunlight. It therefore pays to generate power during favourable conditions and then use it at peak times. This allows us to optimise electricity consumption and gain energy independence.
SLIM ULTRA-5 51.2 V 100 A energy storage systems are widely used in private areas (family houses) and public areas (restaurants, hotels, supermarkets, factories, etc.).
Key Features:

The use of lithium iron phosphate (LiFePO4) cells guarantees long life and safety of the device.
The battery can handle approximately 6,000 cycles, allowing the device to be repeatedly charged and discharged while maintaining at least 60% of its original capacity. This translates into a long service life, which is critical in applications requiring stable power availability over many years.
The battery management system (BMS) monitors various parameters such as voltage, current, temperature and state of charge. It also protects the device from excessive discharge, overcharging and extreme temperatures.
The modular design allows the storage units to be connected in parallel, allowing us to expand the PV facility in the future and increase capacity in the event of increased energy demand.
The modern design and small dimensions allow the device to be installed in virtually any interior.
Energy storage - kits

The SLIM ULTRA-5 51.2 V 100 Ah 100 A energy storage system works with a solar inverter - 8000 VA and 10000 VA models - in a photovoltaic installation. The system is practical and can be configured according to the included instructions.
The cooperation and integration of these components into a single system enables efficient storage and use of electricity in a variety of conditions and applications.
Proper operation of the energy storage system and the inverter is critical for efficient storage and use of electricity, ensuring reliable power supply to equipment and optimal management of power generation and consumption.

*The SINUS PRO ULTRA 8000VA and 10000VA models are designed for the SLIM ULTRA-5 51.2 V 100 A energy storage battery model. The built-in BMS in the SLIM ULTRA-5 51.2V 100A energy storage system is designed to supply the 48V DC voltage generated by the Ultra 8000VA and 10000VA inverters.

What are the individual devices in the kit used for?

Energy storage devices are used to store surplus electricity that can be used by the user during peak demand periods, such as morning and evening.
The inverter is mainly used for power conversion. It converts direct current (DC) from energy storage to alternating current (AC), which can be used to power electrical appliances in the home, including heating systems (central heating), electronics and household appliances (refrigerators, microwave ovens, televisions), computers, and power tools.
The inverter can perform the functions of monitoring, controlling and managing the operation of energy storage, such as power flow control and over-charge or over-discharge protection.
Who is our kit for?
Our kit can appeal to a wide range of consumers looking to improve energy efficiency, reduce costs, increase energy independence and reduce greenhouse gas emissions:

Homeowners: people who own houses or apartments and want to install an energy storage system to reduce their electricity bills, increase energy independence and minimise their impact on the environment by using renewable energy sources.
Businesses and enterprises: businesses that own buildings and want to install an energy storage system to reduce electricity costs and increase power reliability in emergency situations.
Public institutions and organisations: schools, offices, hospitals and other public institutions and NGOs that want to install an energy storage system to reduce electricity consumption, reduce operating costs and increase power reliability in emergency situations.

Specifications:

Rated voltage: 51.2 V
Recommended charging voltage: 57.6 V
Rated capacity: 100 Ah
Maximum charging voltage: 58.4 V
Energy density: 5120 Wh
Maximum continuous current: 100 A
Clamp type: 1. - 2. - 3. - 4. - 5: M8
Housing material: SPCC
Cycle life (0.2 °C, 25 °C, 80% evaporation depth): 6000 cycles
Efficiency: 98 %
Discharge temperature: (-20 to 60) °C
Load temperature: (0 to 55) °C
Storage temperature: (-5 to 30) °C
Self-discharge within one month: less than 3%
Maximum number in parallel circuit: 16 pcs
Maximum number in series: not allowed
Dimensions: 750x800x66 mm
Weight: 56.5 kg

We invite you to watch very practical instructional videos:

How to connect an energy storage + solar inverter Ultra 10 000 (48 V) - https://www.youtube.com/watch?v=F4c2-JrLsyY
How to connect and communicate energy storage + solar inverter Ultra 10 000 (48V) - https://www.youtube.com/watch?v=i3thZBzM2Kc
How to install an app to communicate between one of the three energy storage devices and your laptop - https://www.youtube.com/watch?v=bVxgm6kBa0w