Replacement lamp - for IVA.HA320 IVAR.UV LIGHT

Product detailed description

UV lamps are essential components in water treatment systems, particularly in installations where microbial control is required. The IVA.HA320 system is commonly used in domestic and commercial water purification setups, including filtration and reverse osmosis units. Installers and service technicians working in this field regularly replace UV lamps to maintain system efficiency and hygiene standards. The lamp must be compatible with the housing and electrical system to ensure safe and effective operation.

When replacing a lamp in an existing UV system, it is important to verify the correct model and specifications. The IVA.HA506 is designed to fit the IVA.HA320 housing and deliver the required UV intensity for effective water disinfection. The lamp must be installed in a clean, dry environment and connected to a suitable power supply. Regular inspection and replacement are necessary to maintain system performance and safety.

Technical parameters

Installation and connection

Installation of the IVA.HA506 requires disconnecting the power supply and removing the old lamp. The lamp is inserted into the housing and secured in place. The electrical connections must be verified for correct polarity and insulation. Common installation mistakes include incorrect lamp orientation, poor electrical contact, and failure to clean the housing before installation. It is important to ensure that the lamp is fully seated and that the housing is sealed to prevent water ingress.

Compatibility and accessories

The IVA.HA506 is specifically designed for use with the IVA.HA320 UV system. It is not compatible with other models or systems without verification. No additional accessories are required for installation, but it is recommended to check the condition of the housing and electrical connections before fitting the new lamp. No related products are listed for this model.

Technical background for designers

UV lamps operate by emitting ultraviolet light at a specific wavelength to destroy microorganisms in water. The IVA.HA506 is constructed from materials that ensure durability and resistance to the operating environment. The lamp must be integrated into the system with proper electrical and mechanical connections. The efficiency of the lamp is influenced by factors such as water clarity, flow rate, and the presence of suspended solids. These factors must be considered during system design to ensure optimal performance and lamp life.

Service and operation

Regular maintenance of the UV system includes checking the lamp for signs of wear, verifying the output, and ensuring that the housing is clean and free from obstructions. The operational life of the lamp is approximately 8000 hours, after which it should be replaced to maintain system performance. No specific service intervals are provided beyond this operational life. It is important to follow the manufacturer's guidelines for safe operation and replacement.

Frequently asked questions

Can the IVA.HA506 be used with other UV systems?
No, the lamp is specifically designed for the IVA.HA320 system and is not compatible with other models without verification.

How often should the lamp be replaced?
The lamp has an operational life of approximately 8000 hours. It should be replaced after this period to maintain system efficiency.

What should be checked before installation?
Before installation, the housing should be cleaned, and the electrical connections should be verified for correct polarity and insulation.

Does the lamp require additional accessories?
No additional accessories are required for installation. The lamp is fitted directly into the IVA.HA320 housing.