Press jaw PB2-B - B16;16mm IVAR.PB2-B

Product detailed description

Press jaws are essential components in the installation of press-fit pipe systems, particularly in applications requiring high integrity and leak-free connections. In residential, commercial and industrial buildings, installers often work with copper or plastic pipes in heating, plumbing and irrigation systems. These systems demand precision during installation to ensure long-term performance and compliance with technical standards. The IVAR.ALPEX system is designed for such environments, where reliable and rapid connections are required without the need for soldering or threading. The press jaw is used in conjunction with a dedicated electro-hydraulic press to form a secure mechanical connection between the pipe and fitting.

Correct tooling is crucial for achieving consistent and compliant connections. The press jaw must match the fitting size and system specifications to avoid misalignment, incomplete pressing or damage to the pipe. Installers working with the IVAR.ALPEX system must ensure that the correct jaw is selected for each fitting size and that the press is calibrated according to the manufacturer's guidelines. This ensures that the mechanical connection meets the required pressure and temperature ratings for the application.

Technical parameters

Code	46791-50
Brand	IVAR

The technical parameters for this press jaw are defined by the manufacturer and are specific to the IVAR.ALPEX system. The 16mm size indicates the pipe diameter for which the jaw is designed. When selecting this tooling, installers must refer to the manufacturer’s technical data sheet to confirm compatibility with the fitting and press tool. The jaw is engineered to apply the correct pressure profile during the pressing operation, ensuring a secure and durable connection.

Installation and connection

The installation process involves positioning the press jaw in the electro-hydraulic press and aligning it with the fitting and pipe. The press must be operated according to the manufacturer's instructions to ensure the correct pressing force and duration. The connection size is determined by the fitting and pipe dimensions, and the installer must verify that the press jaw is correctly seated before initiating the pressing cycle. Common installation mistakes include using the wrong jaw size, misalignment of the tooling or failure to clean the pipe and fitting surfaces before pressing. These errors can lead to incomplete connections or system failures.

Compatibility and accessories

This press jaw is specifically designed for use with the IVAR.ACO 203 XL BT electro-hydraulic press and the IVAR.ALPEX system fittings. It is not interchangeable with other press systems or jaw types. To complete the installation process, the electro-hydraulic press must be available and properly maintained. No additional accessories are required for standard pressing operations. Installers should ensure that the press is compatible with the jaw and that the system is calibrated according to the manufacturer's specifications.

Technical background for designers

The IVAR.ALPEX system relies on a mechanical pressing method to create a secure connection between the pipe and fitting. The press jaw is made from durable materials that can withstand repeated use and high pressures. The pressing process involves compressing the fitting around the pipe to form a metal-to-metal bond, which provides a leak-free and vibration-resistant connection. The system is designed for use with copper or plastic pipes, and the jaw must be selected according to the pipe material and diameter. The service life of the connection depends on the quality of the pressing operation, the condition of the pipe and fitting surfaces, and the operating conditions of the system.

Service and operation

The press jaw requires no regular maintenance beyond routine cleaning and inspection for wear or damage. Installers should check the jaw for signs of deformation or excessive wear before each use. If the jaw shows signs of damage or if the pressing operation does not produce a consistent connection, the tooling should be replaced. No service intervals are specified in the technical data, and the jaw is intended for long-term use provided it is handled correctly and stored in a dry environment.

Frequently asked questions

Can the IVAR press jaw PB2-B - B16;16mm be used with other press tools?
No, it is specifically designed for use with the IVAR.ACO 203 XL BT electro-hydraulic press. Using it with other tools may result in improper pressing and system failure.

What pipe size is this press jaw suitable for?
The 16mm size is intended for pipes with a corresponding diameter within the IVAR.ALPEX system. Refer to the manufacturer’s technical data sheet for exact specifications.

Is it compatible with copper or plastic pipes?
Yes, the IVAR.ALPEX system supports both copper and plastic pipes. The press jaw is designed to accommodate the specific material properties of each.

What should be checked before pressing to ensure a successful connection?
Before pressing, ensure the pipe and fitting are clean, the jaw is correctly seated in the press, and the press is calibrated according to the manufacturer’s guidelines. Misalignment or contamination can compromise the connection.