Submersible Drainage Pump IPC 550

Product detailed description

Submersible drainage pumps are essential in installations where temporary water removal is required. The IBO IPC 550 is typically used in residential and commercial settings to manage water accumulation in basements, swimming pools and sump tanks. Installers often encounter this type of pump in emergency dewatering scenarios or during maintenance operations. The compact dimensions and plastic construction make it suitable for use in confined spaces and non-aggressive water environments. It is not intended for continuous operation or high-solids applications.

The pump is designed for short-term deployment, making it ideal for seasonal tasks such as draining swimming pools or removing water from flooded basements. It is not suited for long-term wastewater handling or industrial applications involving high particulate content. The 5 m power cable allows for flexible positioning within the water source, while the 230 V supply ensures compatibility with standard single-phase electrical systems.

Technical parameters

EAN	5903111344634
Length of power cable (m)	5
Maximum flow rate (l/min)	100
Pump voltage (V)	230 V
Dimensions H x W (cm)	39x25
Pump head (m)	6
Weight	4.5 kg
Code	PR_38648
Brand	IBO

The pump’s maximum flow rate of 100 l/min and 6 m head determine its suitability for small to medium-sized dewatering tasks. These parameters are critical for sizing the pump to the volume and elevation of the water source. The 230 V supply voltage is standard for single-phase electrical systems, and the 5 m power cable length allows for flexible installation. The dimensions (39 x 25 cm) and 4.5 kg weight make it manageable for manual handling and transport.

Installation and connection

The IBO IPC 550 is installed by submerging it directly into the water source. The pump should be placed on a stable, level surface to prevent vibration and ensure efficient operation. The 5 m power cable should be routed to a suitable electrical supply point, ensuring the connection is secure and protected from water ingress. The pump must be connected to a 230 V single-phase supply with appropriate circuit protection, including a residual current device (RCD) for safety. Common installation mistakes include using the pump in environments with high particulate content, which can cause mechanical wear, and failing to ensure the pump is fully submerged, which can lead to overheating. It is also important to verify that the pump is not installed in a location where it could be exposed to prolonged dry running, as this can damage the internal components.

Compatibility and accessories

The IBO IPC 550 is compatible with standard electrical systems and can be integrated into temporary dewatering setups. It is typically used with a flexible discharge hose to direct water away from the source. Additional accessories such as a float switch or timer may be required for automated operation, depending on the application. The pump is not designed for use with high-solids or abrasive media and should not be combined with systems that require continuous operation. No specific related products are available for this model. Installers should ensure that all electrical connections are made in accordance with local regulations and that the pump is used within its specified parameters to avoid damage or premature failure.

Technical background for designers

The IBO IPC 550 operates using an electric motor driving an impeller to generate flow and pressure. The plastic housing provides resistance to corrosion and is suitable for use in non-aggressive water environments. The pump is designed for intermittent operation, and its performance is affected by factors such as the viscosity of the water, the presence of suspended solids and the temperature of the operating environment. The 230 V supply voltage is standard for single-phase systems, and the 5 m power cable allows for flexible positioning. The pump’s dimensions and weight make it suitable for manual handling and transport. The integration of the pump into a system should consider the required flow rate, head and the type of water being handled. The pump is not intended for use in aggressive or high-solids environments, and its performance may be reduced in such conditions.

Service and operation

The IBO IPC 550 requires minimal maintenance due to its simple design and plastic construction. However, it is important to inspect the pump regularly for signs of wear, particularly on the impeller and motor components. The pump should be removed from the water source for inspection and cleaning after extended use. No specific service intervals are provided in the technical data, but the pump should be checked for any signs of damage or performance issues before each use. During operation, the pump should be monitored for unusual noise or vibration, which may indicate mechanical issues. The pump should not be operated in dry conditions, as this can cause overheating and damage to the internal components. If the pump is to be stored for an extended period, it should be cleaned and dried to prevent corrosion or degradation of the plastic components.

Frequently asked questions

Can the IBO IPC 550 be used for continuous operation?
No, the pump is designed for intermittent use and is not suitable for continuous operation. Prolonged use may lead to overheating and mechanical failure.

Is the IBO IPC 550 suitable for use with wastewater containing solids?
No, the pump is not designed for high-solids or abrasive media. It is intended for use with clean or slightly contaminated water only.

Can the IBO IPC 550 be connected to a standard household electrical supply?
Yes, the pump is compatible with a 230 V single-phase supply, which is standard in most residential and commercial installations.

What is the maximum depth at which the IBO IPC 550 can be submerged?
There is no specified maximum submersion depth in the technical data. The pump is designed for use in typical dewatering applications and should be used within the manufacturer’s recommended conditions.