Submersible pump IBO SCM 3-18 - RTS 230V

Product detailed description

This submersible pump is designed for installation in wells, boreholes, water tanks, and collection shafts. It is commonly used in domestic and industrial water supply systems, irrigation, and fire protection stations. The modular construction allows for quick disassembly and repair without replacing the entire unit. The pump is suitable for both new and existing water sources and can be integrated into distribution pipelines for pressure boosting. The pump is equipped with thermal protection and floating impellers to handle abrasive particles and sand in water.

When installing, ensure the pump is fully submerged and the power cable is properly secured. The pump is intended for use with clean or slightly contaminated water and is not suitable for chemically aggressive media. The pump is designed for continuous operation and can be used in both residential and commercial applications. The modular design ensures that in the event of a failure, only the affected component needs to be replaced, reducing downtime and repair costs.

Technical parameters

Installation and connection

Installation of the IBO SCM 3-18 - RTS submersible pump involves lowering the unit into the water source using a suitable cable or lifting device. Ensure the pump is fully submerged and the power cable is routed to the surface without kinks or damage. The pump should be connected to a 230V power supply with a dedicated circuit and protective devices such as fuses or circuit breakers. Check the integrity of the cable insulation and ensure the pump is not installed in a location where it may be exposed to freezing temperatures.

Common installation mistakes include insufficient submersion, which can lead to cavitation and damage, and incorrect cable routing, which can cause electrical faults. Always verify the water level before installation and ensure the pump is compatible with the water source. The pump should be installed in accordance with local electrical and plumbing regulations.

Compatibility and accessories

The IBO SCM 3-18 - RTS is compatible with standard water distribution systems and can be integrated into both new and existing installations. It is recommended to use a pressure tank and control system for stable operation. Additional accessories such as a check valve, filter, and pressure switch may be required depending on the application. The pump is suitable for use with fire protection systems and can be part of a domestic water supply setup.

Technical background for designers

The IBO SCM 3-18 - RTS operates on a centrifugal principle, where the impeller generates pressure by accelerating water and transferring it through the discharge pipe. The pump is constructed with materials that resist corrosion and abrasion, making it suitable for use with water containing sand and other abrasive particles. The modular design allows for easy maintenance and replacement of components without the need to replace the entire unit. The pump is designed to be integrated into closed-loop systems and can be controlled using standard pressure switches or automated systems.

The service life and efficiency of the pump are influenced by the quality of the water being pumped, the frequency of operation, and the maintenance schedule. The thermal protection system helps prevent overheating and extends the operational life of the motor. The pump is suitable for both intermittent and continuous operation, depending on the system requirements.

Service and operation

Regular inspection of the pump is recommended to ensure optimal performance. Check the power cable for signs of wear or damage and verify the integrity of the electrical connections. The pump should be removed for inspection and cleaning if it is suspected of being clogged with sand or debris. In the event of a failure, the modular design allows for quick replacement of the affected component. No specific service intervals are provided in the brief, but routine checks are advised to prevent unexpected downtime.

Frequently asked questions

Can the IBO SCM 3-18 - RTS be used in new boreholes?
Yes, the pump is suitable for new or fresh boreholes, wells, and water tanks. It is designed to handle water with abrasive particles and sand.

What is the maximum depth for installation?
The pump can be installed in water sources with a depth corresponding to the 20m power cable length. Ensure the pump remains fully submerged during operation.

Is the pump suitable for fire protection systems?
Yes, the pump is suitable for use in small and medium fire protection stations. It provides sufficient pressure and flow for such applications.

Can the pump be used for irrigation?
Yes, the IBO SCM 3-18 - RTS is suitable for irrigation and spraying applications. It provides a flow rate of 120 l/min and a head of 78m, making it suitable for garden or agricultural use.