Submersible sludge, drainage pump IP 1100 INOX

Product detailed description

Submersible sludge pumps are commonly used in residential and light commercial applications where water removal is required in confined or hard-to-reach spaces. Installers often encounter scenarios such as basement flooding, pool drainage, or rainwater collection systems. These pumps are designed to operate in non-aggressive water environments and are typically deployed in sumps or temporary water accumulation points. The IBO 1100 INOX is suitable for intermittent operation and is not intended for continuous or heavy-duty use. It is commonly used in conjunction with manual or automatic float switches to control pump activation based on water level.

When installing the IBO 1100 INOX, it is important to ensure the pump is fully submerged during operation to prevent dry running. The pump is not suitable for abrasive or highly contaminated media, and its plastic construction makes it incompatible with aggressive chemicals or solvents. The pump is typically used in conjunction with a control system to manage water levels and prevent overflow in basements or rainwater storage tanks.

Technical parameters

EAN	5903887209243
Length of supply cable (m)	5
Maximum flow rate (l/min)	250
Pump voltage (V)	230 V
Dimensions H x W x D (cm)	38x23
Pump head (m)	9.5
Weight	6.3 kg
Code	PR_38653
Brand	IBO

The pump has a maximum flow rate of 250 l/min and a head of 9.5 m, which determines its suitability for applications requiring moderate lift and flow. The 230 V power supply is standard for single-phase installations in Europe. The 5 m cable length allows for flexible positioning relative to the power source. The dimensions of 38 x 23 cm indicate a compact design, suitable for installation in small sumps or tanks.

Installation and connection

The IBO 1100 INOX is installed directly into the water source, typically in a sump or tank. The pump must be fully submerged to operate correctly. The discharge port is adjustable using a transition fitting, allowing for connection to different pipe sizes. The pump is connected to a 230 V power supply via a standard electrical connection. It is important to ensure the pump is installed in a stable position to prevent movement during operation. Common installation errors include insufficient submersion, which can lead to overheating and mechanical failure, and incorrect discharge pipe sizing, which can reduce efficiency and increase wear on the pump components.

Compatibility and accessories

The IBO 1100 INOX is compatible with standard DN pipe fittings and can be connected to a control system using a float switch. It is recommended to use a dedicated circuit breaker for the pump to ensure electrical safety. Additional accessories such as a control panel or a level sensor may be required depending on the specific application. The pump is not compatible with aggressive media or high-temperature environments.

Technical background for designers

The IBO 1100 INOX operates on a centrifugal pumping principle, where the impeller generates a pressure differential to move water through the system. The pump is constructed from non-corrosive plastic materials, making it suitable for use in non-aggressive water environments. The compact design allows for installation in tight spaces, and the lightweight construction facilitates handling and positioning. The pump is not designed for continuous operation and should be integrated into a system that allows for periodic rest periods to prevent overheating. The efficiency of the pump is influenced by the viscosity and temperature of the water being pumped, as well as the condition of the impeller and internal components.

Service and operation

The IBO 1100 INOX requires minimal maintenance due to its simple design and non-corrosive materials. It is important to regularly inspect the pump for signs of wear or damage, particularly to the impeller and discharge port. The pump should be removed from the water source for inspection and cleaning if it shows signs of reduced performance. No specific service intervals are provided in the technical data, but it is recommended to perform routine checks to ensure the pump remains in good working condition. The pump should be disconnected from the power supply before any maintenance is carried out to ensure safety.

Frequently asked questions

Can the IBO 1100 INOX be used for continuous operation?
No, the pump is designed for intermittent use and is not suitable for continuous operation. Prolonged use may lead to overheating and mechanical failure.

Is the IBO 1100 INOX compatible with rainwater harvesting systems?
Yes, the pump can be used in rainwater harvesting systems to transfer water from collection tanks to storage or distribution points. It is important to ensure the water is free from large debris to prevent clogging.

Can the IBO 1100 INOX be connected to a control panel?
Yes, the pump can be connected to a control panel using a float switch or level sensor to automate operation based on water level.

What is the maximum depth at which the IBO 1100 INOX can be submerged?
There is no specific maximum depth provided in the technical data. However, the pump should be installed in a stable position and fully submerged to ensure proper operation.