Submersible sludge pump FURIATKA 750 with crusher

Product detailed description

The IBO FURIATKA 750 submersible sludge pump with crusher is commonly used in industrial, agricultural and residential applications where the removal of contaminated water, sewage sludge and greywater is required. Installers typically deploy this equipment in basement water extraction scenarios, as well as in surface water management from rivers, ponds and swimming pools. The unit is suitable for environments where the pumped liquid contains suspended solids and fibrous materials that require mechanical cutting to prevent clogging. The operating conditions must ensure that the liquid temperature remains below 35 °C and that the ambient temperature does not exceed 70 °C.

This pump is often integrated into drainage and wastewater management systems, particularly in settings where conventional pumps would fail due to solids content. The inclusion of a mechanical crusher ensures the breakdown of fibrous material such as hair, rags and plant matter before pumping. The device is also equipped with a float switch that activates the pump automatically when the water level reaches a predefined threshold. This feature reduces manual intervention and ensures continuous operation in fluctuating water levels.

Technical parameters

EAN	5903111344405
Length of supply cable (m)	9
Maximum flow rate (l/min)	300
Pump voltage (V)	230 V
Dimensions H x W x D (cm)	47x26
Pump head (m)	12
Weight	20 kg
Code	PR_38966
Brand	IBO

The pump’s technical specifications define its suitability for specific applications. A maximum flow rate of 300 l/min and a head capacity of 12 m indicate the pump’s ability to transport large volumes of water over moderate distances. The 230 V power supply is standard for single-phase industrial and domestic applications. The 50 mm (2") discharge port size allows compatibility with standard piping systems. These parameters are essential for proper system design and component sizing to ensure efficient operation and avoid overloading the motor or piping network.

Installation and connection

To install the IBO FURIATKA 750, the site must have sufficient space for submersion and unrestricted access for maintenance. The pump should be lowered into the water using a lifting eye or hook, ensuring it rests on a stable base. The 9 m cable length allows flexibility in positioning the pump relative to the power source. The discharge pipe must be securely connected to the 50 mm threaded outlet using a compatible coupling to prevent leakage. The float switch must be correctly positioned to trigger the pump at the desired water level. Common installation errors include incorrect cable routing, which can lead to damage, and improper alignment of the discharge pipe, resulting in reduced efficiency or backflow.

Compatibility and accessories

The IBO FURIATKA 750 is compatible with standard 230 V electrical systems and can be integrated with control panels featuring overload protection and dry-run protection. Additional accessories such as a power cable extension, check valve, or flexible coupling may be required depending on the installation layout and distance to the discharge point. A pressure gauge can also be added for monitoring system performance. While no alternative models are specified, similar submersible sludge pumps with comparable specifications may serve as alternatives in certain applications.

Technical background for designers

The IBO FURIATKA 750 operates using an electric motor driving an impeller to generate hydraulic pressure. The crusher mechanism, typically a cutting rotor, shreds fibrous materials before they enter the pump chamber. The motor housing is sealed against water ingress, with internal insulation preventing electrical faults. The pump is constructed from durable materials suitable for long-term submersion in corrosive environments. Designers should consider the impact of solids concentration and viscosity on the pump’s efficiency and service life. Integration into larger systems requires matching the pump’s flow and pressure capabilities with the downstream components such as filters, valves and storage tanks.

Service and operation

Routine inspection of the pump includes checking the float switch for proper activation, verifying the integrity of the power cable and ensuring the discharge pipe is free from blockages. The pump should be removed periodically for visual inspection of the cutting mechanism and impeller wear. No specific service intervals are provided, but any signs of reduced flow or unusual noise should prompt further investigation. The pump must be disconnected from power during maintenance to ensure safety. Lubrication points, if present, should be treated according to the manufacturer’s guidelines.

Frequently asked questions

Can the IBO FURIATKA 750 handle water temperatures above 35 °C?
No, the maximum allowable temperature of the pumped liquid is 35 °C according to the manufacturer’s specifications.

Is the discharge port compatible with 2" threaded fittings?
Yes, the pump has a 50 mm DN discharge port, which corresponds to 2" in standard piping systems.

Can the pump be used in a permanently submerged installation?
Yes, the pump is designed for continuous submersion and is suitable for long-term operation in water-filled environments.

Does the pump require a separate control panel for operation?
No, the pump includes an internal float switch that activates the pump automatically when water reaches a certain level.