T-piece press - reduced, 50 x 63 x 50

Product detailed description

This press T-piece is commonly used in residential and commercial heating and plumbing systems where a reduction in pipe diameter is necessary. It allows for the connection of ALPEX pipes of different sizes, ensuring a secure and leak-free joint. The fitting is suitable for use in systems operating at temperatures up to +120°C and nominal pressures up to PN 10. It is typically installed by heating the pipe and fitting, then pressing them together using compatible pressing tools. This type of connection is preferred in systems where flexibility and durability are required, such as in underfloor heating, domestic hot water, and central heating applications.

The T-piece is designed for use with ALPEX pipes and is compatible with pressing tools of type B-F-TH. It is commonly found in systems where multiple branch connections are needed, such as in manifold systems or in complex pipe layouts. The fitting is suitable for use in both new builds and renovation projects, where a reliable and long-lasting connection is essential. The nickel-plated brass construction ensures resistance to corrosion and mechanical wear, making it suitable for use in aggressive environments.

Technical parameters

The operating temperature of +120°C makes this T-piece suitable for hot water and heating systems. The nominal pressure rating of PN 10 ensures compatibility with standard pressure levels in most plumbing and heating installations. The material, nickel-plated brass CW617N, provides good mechanical strength and corrosion resistance. These parameters are essential for proper sizing and selection in accordance with system requirements and local regulations.

Installation and connection

Installation of this press T-piece requires a compatible pressing tool of type B-F-TH. The procedure involves heating the ALPEX pipe and the fitting to the required temperature, aligning the connection, and pressing the components together using the tool. The connection sizes are 50 mm, 63 mm, and 50 mm, allowing for a reduction in one of the branch connections. It is important to ensure that the pipe and fitting are clean and free from debris before pressing. Common installation mistakes include using incorrect pressing tools, which can lead to an incomplete or faulty connection, and failing to check the alignment before pressing.

Compatibility and accessories

This T-piece is designed for use with ALPEX pipes and requires compatible pressing tools for installation. It is typically used in conjunction with other press fittings, such as elbows, couplings, and straight connectors, to create a complete piping system. Additional components such as clamps made of stainless steel and EPDM seals are included as part of the fitting. No other related products are required for installation, but it is important to ensure that all components are from the same manufacturer to ensure compatibility and system integrity.

Technical background for designers

The press T-piece operates by creating a mechanical and thermal bond between the pipe and the fitting. The nickel-plated brass CW617N material provides good thermal conductivity and mechanical strength, ensuring a durable connection. The EPDM seal ensures a tight and leak-free joint, while the stainless steel clamp provides additional support and prevents movement. The fitting is integrated into the system by aligning the pipe and fitting, then pressing them together using the appropriate tool. The service life and efficiency of the fitting are influenced by the quality of the pressing process, the compatibility of the materials, and the operating conditions of the system.

Service and operation

Once installed, this press T-piece requires no regular maintenance. However, it is important to periodically check the integrity of the connection for signs of leakage or damage. If a leak is detected, the fitting should be replaced immediately. There are no specific service intervals required for this product, as it is designed for long-term use under normal operating conditions. The nickel-plated brass construction ensures resistance to corrosion and mechanical wear, making it suitable for use in aggressive environments.

Frequently asked questions

Can this T-piece be used with other types of pipe besides ALPEX?
No, this T-piece is specifically designed for use with ALPEX pipes and requires compatible pressing tools for installation.

Is it possible to use this T-piece in a system operating at higher than +120°C?
No, the maximum operating temperature is +120°C as specified in the technical parameters. Exceeding this temperature may compromise the integrity of the connection.

Can this T-piece be used in a system with a pressure higher than PN 10?
No, the nominal pressure rating is PN 10. Using the fitting in a system with higher pressure may result in failure of the connection.

What pressing tools are required for installation?
This T-piece requires pressing tools of type B-F-TH for proper installation. Using other types of tools may result in an incomplete or faulty connection.