T-piece press - reduced, 63 x 32 x 63

Product detailed description

Press T-pieces are essential components in the installation of heating and plumbing systems, particularly where multiple pipe branches are required. This reduced T-piece allows for the connection of ALPEX pipes with different diameters, ensuring a secure and leak-free junction. It is commonly used in residential and commercial buildings for underfloor heating, domestic hot water distribution, and other low-pressure hydraulic systems. The nickel-plated brass construction provides corrosion resistance, while the EPDM sealing ensures compatibility with a wide range of fluids and temperatures. Installers should ensure correct sizing and plier type to maintain system integrity.

Technical parameters

Material	Nickel-plated brass CW617N
Operating temperature	+120 °C
Nominal pressure	PN 10
Weight	1.214 kg
Code	512094
Brand	IVAR

The operating temperature of +120°C and a nominal pressure of PN 10 make this T-piece suitable for systems with moderate thermal and hydraulic demands. The material, nickel-plated brass CW617N, ensures long-term durability in aggressive environments. These parameters are essential for selecting the correct component in accordance with system design requirements.

Installation and connection

To install the T-piece, the installer must first prepare the ALPEX pipes by cutting them to the correct length and removing any burrs. The press T-piece is then fitted over the pipe ends, ensuring the EPDM seal is correctly positioned. The connection is secured using a B-F-TH type plier, which applies even pressure around the circumference of the fitting. It is important to verify that the plier is correctly aligned and that the press mark is fully formed. Common installation mistakes include using the wrong plier type, which can lead to incomplete pressing and potential leaks. Always check that the fitting is fully seated on the pipe before pressing.

Compatibility and accessories

This press T-piece is specifically designed for use with ALPEX pipes and must be used in conjunction with a suitable B-F-TH type plier. The EPDM sealing material ensures compatibility with the pipe’s inner surface and the plier jaws. Additional components such as straight press fittings or elbows may be required to complete the system layout. Installers should ensure that all fittings and tools are from the same manufacturer to maintain system integrity and avoid compatibility issues.

Technical background for designers

The press T-piece operates by forming a mechanical and hydraulic seal between the pipe and the fitting. The nickel-plated brass CW617N material offers high tensile strength and resistance to corrosion, making it suitable for long-term use in heating and plumbing systems. The EPDM sealing material ensures a tight fit and is resistant to thermal expansion and contraction. The integration of this fitting into the system depends on correct sizing and the use of compatible pliers. The service life and efficiency of the fitting are influenced by the quality of the pressing operation and the environmental conditions within the system.

Service and operation

No regular maintenance is required for this press T-piece during normal operation. However, periodic visual inspections should be carried out to check for signs of wear, corrosion, or leakage. If any issues are detected, the fitting should be replaced immediately. There are no scheduled service intervals specified for this component. Proper installation is the key to ensuring long-term reliability and performance.

Frequently asked questions

Can this press T-piece be used with other types of pipe besides ALPEX?
No, this fitting is specifically designed for ALPEX pipes and must not be used with other pipe materials.

Is it necessary to use a specific type of plier for pressing?
Yes, the B-F-TH type plier is required to ensure a correct and secure connection.

Can the T-piece be used in systems with higher temperatures than 120°C?
No, the maximum operating temperature is specified as +120°C and should not be exceeded.

Is the EPDM sealing material compatible with all types of fluids?
Yes, the EPDM material is suitable for use with water and other common fluids in heating and plumbing systems.