Victron Energy Sun Inverter 12V/250A-15 IEC

Product detailed description

The Victron Energy voltage converter is an efficient and reliable voltage converter built on a proven and field-tested platform. The inverter incorporates a robust toroidal transformer that has proven its reliability in Victron Energy inverters for many years.

Key Features:

High starting performance:
Required for starting loads such as inverters for LED bulbs, halogen lamps or power tools.

ECO mode:
In ECO mode, the inverter switches to standby mode when the load drops below the set value (min. load: 15 W). After switching to standby mode, the inverter switches on for a short time (adjustable, default: every 2.5 seconds). If the load exceeds the preset level, the inverter will remain on.

PWM solar charger:
The solar charger provides battery charging using the energy obtained from the solar panels. The charging algorithm is programmable.

Remote on/off:
The Phoenix Inverter Control VE.Direct remote panel (not included) can be used to remotely turn the inverter on or off. Alternatively, the remote switch can be plugged into the two-pole connector or between the battery plus and the left contact of the two-pole connector.

LED diagnostics:
For a description of each state, please refer to the manual.

Bluetooth:
Inverter and solar charger parameters can be read, monitored and configured via Bluetooth
VictronConnect app.

VE.Direct communication port:
The VE.Direct port can be used to connect to a GX device, GlobalLink 520 for monitoring through the VRM portal, or to connect to a PC for monitoring or configuration using the VictronConnect application.

Monitoring via the VictronConnect app or GX device:

Input and output voltage of inverter and % load
Solar energy, voltage and current
Operating status and alarms
Fully configurable via the VictronConnect app:

Low battery alarm triggering and level reset
Low battery shutdown and restart levels
Dynamic shutdown: load-dependent shutdown levels
Output voltage 210-245 V and frequency 50 Hz or 60 Hz
ECO mode on/off and ECO mode shooting level
Battery charging current, algorithm and voltage
Temperature compensation for battery charging or low temperature level reduction
Load transfer to another AC power source: automatic transfer switch:
For our low power inverters, we recommend our Filax automatic switch. Filax features a very short switching time (less than 20 milliseconds), so computers and other electronic devices yes
continue to operate without interruption.

Connection of DC and photovoltaic sources using screw terminals:
No special cable clamps or tools are required for installation

Available with IEC-320 socket:
IEC-320 plug is included.

Specifications:

230 V AC +/- 3% 50 Hz or 60 Hz +/- 0.1%.
continuous power at 25 ºC: 250 VA / 200 W
Peak power: 400 W
maximum efficiency: 87 %
self-consumption at zero load: max. 4.2 W
self-consumption in ECO mode: max. 0.8 W
Connection 230 V AC: IEC-320 plug
Operating temperature range: -40 to +60 ºC (fan cooling)
Humidity (non-condensing): max. 95
Protection class: IP21
weight: 2.4 kg
Dimensions: 86 x 165 x 260 mm