Water ball valve TYTAN with union, compression nut and lever handle 3/4", F-M
Code: ZKWSDR-PP-20Product detailed description
The TYTAN 3/4″ ball valve is built for jobs where a straight, unrestricted shut-off is needed on a heating or plumbing line — its full-bore design means the ball opening matches the pipe diameter, so there is no flow restriction and no extra pressure drop once the valve is open.
A quarter-turn of the PVC-coated steel lever is all it takes to open or close the line, and the chrome-plated brass ball with a PTFE (Teflon) seal keeps that action smooth and leak-tight for years. The union end includes a compression nut, letting you take up small alignment tolerances when fitting the valve into an existing run of pipe without twisting the whole assembly.
- Connection: G3/4″, female-male (F-M), union/compression nut on one side
- Body: brass, nickel-plated finish
- Ball: chrome-plated brass, PTFE seal, full bore
- Handle: PVC-coated steel lever, quarter-turn action
- Nominal pressure: 30 bar
- Max. operating temperature: 120°C
- Working media: hot and cold water, heating systems
- Net weight: 0.368 kg
- Manufacturer's warranty: 5 years
Additional parameters
| Category: | with union, compression nut and lever handle |
|---|---|
| Warranty: | 2 roky |
| EAN: | 5900308747018 |
| Typ: | Guľový ventil so spojkou, plný prierez |
| Pripojenie: | G3/4'' F-M so spojkovou maticou |
| Materiál: | Mosadz, poniklovaná, chrómovaná guľa |
| Tesnenie: | Teflón (PTFE) |
| Rukoväť: | Oceľová páka, PVC povlak |
| Menovitý tlak: | 30 barov |
| Max. teplota: | 120 °C |
| Hmotnosť: | 0,368 kg |
| Záruka: | 5 rokov |
Discussion
Be the first who will post an article to this item!