AQUAJET 82M/24 Domestic waterworks with pressure vessel 24l - action IVAR.AQUAJET

Product detailed description

Domestic waterworks units like the AQUAJET 82M/24 are commonly used in residential and small commercial applications where a reliable and self-sufficient water supply is required. These installations are typically found in homes, cottages, and similar buildings where the water source is not connected to a municipal supply. The system integrates a self-priming pump with a pressure vessel to maintain consistent water pressure and flow. Installers must ensure the system is correctly sized for the building's demand and that the water source meets the required quality standards. The unit is designed for indoor installation in dry, well-ventilated spaces to protect the motor and electronics from environmental factors.

The AQUAJET 82M/24 is suitable for use with clean, non-corrosive, non-abrasive liquids with properties similar to water. It is not intended for use with chemically aggressive or viscous fluids. The system must be installed in a location where the ambient temperature does not exceed 40°C and where the water temperature remains between 0°C and 40°C. The unit is not suitable for continuous operation in environments with high humidity unless additional protective measures are taken.

Technical parameters

Code	82M24L
Brand	IVAR

The operating range of the AQUAJET 82M/24 is up to 5.4 m³/h with a maximum head of 61 m. The pressure vessel has a 24L capacity and is equipped with an internal flexible bladder to separate air and water. The motor is protected by a built-in thermal protection system and a sealed housing with an IP55 rating for the terminal box. These parameters are essential for determining the suitability of the unit for a specific installation, particularly in terms of flow rate, head requirements and environmental conditions.

Installation and connection

Installation begins with verifying the water source meets the required quality standards and that the suction line is free from air leaks. The pump must be connected using appropriate pipe sizes and fittings, with all connections tightened to prevent leakage. The inlet and outlet ports are threaded and must be matched with the corresponding pipe sizes. The unit should be mounted on a stable, level surface to prevent vibration and misalignment. A pressure gauge and non-return valve are recommended to monitor system performance and prevent backflow. Common installation errors include incorrect pipe sizing, failure to prime the pump, and neglecting to install a pressure relief valve.

Compatibility and accessories

The AQUAJET 82M/24 is compatible with standard plumbing systems and can be integrated with pressure switches, expansion vessels and control panels to enhance system functionality. Additional components such as filters, check valves and pressure regulators may be required depending on the application. The unit is not compatible with chemically aggressive or viscous fluids and must be used with clean water sources. No specific accessories are included with the unit, so any necessary components must be ordered separately.

Technical background for designers

The AQUAJET 82M/24 operates using a self-priming, multi-stage centrifugal pump with a sealed asynchronous motor cooled by external ventilation. The pressure vessel contains a flexible bladder that separates the air and water chambers, allowing the system to maintain pressure between pump cycles. The motor is protected by a built-in thermal protection system and a sealed housing with an IP55 rating. The unit is designed for integration into residential water supply systems where a stable and reliable flow is required. The service life and efficiency of the system depend on the quality of the water being pumped, the frequency of operation and the accuracy of the installation.

Service and operation

Regular inspection of the pump and pressure vessel is recommended to ensure optimal performance. The system should be checked for leaks, unusual noise and signs of wear. The pressure vessel should be tested periodically to ensure the internal bladder is intact and that the system maintains the correct pressure. No specific service intervals are provided, but the unit should be serviced if performance declines or if any faults are detected. The system should be disconnected from the power supply before any maintenance is performed to ensure safety.

Frequently asked questions

Can the AQUAJET 82M/24 be used with a water source containing suspended particles?
No, the pump is designed for clean water only. Suspended particles can cause wear and damage to the internal components.

Is the AQUAJET 82M/24 suitable for continuous operation?
The unit is not designed for continuous operation and should be used in applications where the pump cycles on and off as required by the system demand.

Can the pressure vessel be replaced separately?
Yes, the pressure vessel can be replaced if the internal bladder is damaged or if the system requires a different capacity.

Can the AQUAJET 82M/24 be installed in a humid environment?
The unit is not suitable for installation in high humidity unless additional protective measures are taken to prevent condensation and corrosion.