Backup power supplies
Product sorting
List of products
The AVANSA 300W is a professional automatic backup power supply (UPS) designed for...
This backup power supply provides uninterrupted power to circulators in solid fuel...
Designed for heating systems requiring uninterrupted power, this backup power...
The GETI GEP300 is a backup power supply designed for installers and technicians...
The GETI GEP301 is a wall-mounted emergency power supply suitable for installers...
The GETI GEP500 sine 500W (800VA) is designed for installers and technicians...
The GETI GEP501 is a wall-mounted backup power supply suitable for installers and...
The GETI GEP701 is a wall-mounted emergency power supply delivering 700W of pure...
The GETI GEP701LF is a wall-mounted backup power supply with pure sine wave...
Designed for heating systems and pumps, the KEMOT PROsinus-1000 1000VA 700W backup...
The KEMOT PROsinus-2000 is a 1200W backup power supply for 12V DC battery systems,...
Designed for installers and technicians, the KEMOT PROsinus-2200 provides backup...
The KEMOT PROsinus-800 is a wall-mounted backup power supply designed for heating...
The KEMOT PROsinus-800 12V 800VA 500W backup power supply is designed for heating...
The GETI GEP301LF is a wall-mounted backup power supply with a LiFePO4 100 Ah...
The GETI GEP701 is an emergency power supply designed for installers and...
The Renogy Pro 12 V 2000 W HF is a compact 2-in-1 inverter charger for off-grid...
The PNI SafePC E650VA is a compact uninterruptible power supply designed for small...
The SilverCloud SafePC 650AVR is a uninterruptible power supply (UPS) designed for...
The SilverCloud SafePC 650AVR 600 VA / 360 W UPS is designed for installers and...
The REBEL Micropower 1000 is an uninterruptible power supply suitable for...
The VOLT Micro 1500VA 900W 2x9Ah is a line-interactive uninterruptible power...
The VOLT Rack 850VA 480W 9Ah is a line-interactive uninterruptible power supply...
The Victron Energy 12 V 22 Ah AGM battery is designed for deep cycle applications...
The Victron Energy 12 V 90 Ah AGM Deep Cycle Battery is designed for regular deep...
Listing controls
Backup sources for central heating boilers and circulators. (APC and Lumar)
Backup source for gas boilers and circulation pumps should already be part of every boiler room. For one thing, they protect the boiler, the controls and the circulating pump against power surges, so they also provide surge protection and, most importantly, provide enough electricity to run for a few hours during a power outage. For wood or other fuel fired boilers this feature is very important. As the wood or coal in the boiler burns longer and cannot simply be shut down, it heats the boiler continuously and when the circulating pump stops, the boiler overheats within a few minutes. The high temperature in the boiler can cause welds to crack or even cause a fire in the boiler's external insulation. The circulation pump backup power supply will continue to drive the control or the circulation pump, thus avoiding such a problem. Some back-up power supplies also have a loud alarm function in the event of a power failure. Battery operation can be several hours, but this depends on the number of power points and the power of the device. All back-up power supplies include surge protection and one or two electrical outlets with a protective pin.