Ball cap gas FUTURGAS - 1 "MF; lever FIV.80014 P

Product detailed description

This ball valve is commonly used in gas supply systems within residential, commercial, and industrial buildings. Installers typically encounter it during the setup or maintenance of gas lines, particularly where a reliable shut-off function is required. Its robust construction ensures compatibility with both indoor and outdoor environments, making it ideal for a variety of heating and plumbing applications.

The valve is designed to handle nominal pressures up to PN 5 and is suitable for use with gaseous media. It is often found in gas distribution systems, such as those serving boilers, water heaters, and cooking appliances. The lever provides manual operation, enabling quick and precise control of the flow path. Due to its full-bore design, it allows unrestricted media passage when open, which is essential for maintaining system efficiency.

Technical parameters

Installation and connection

Before installation, verify that the pipeline is clean and free of debris that could damage the sealing surfaces. This ball valve features an extended thread design, allowing for either internal or external threading depending on the system configuration. Connect using a 1-inch male-to-female (MF) thread, ensuring a tight seal with appropriate thread tape or sealant. Check the orientation of the lever to ensure it aligns with the intended direction of flow. Common mistakes include incorrect thread engagement and improper seating of the valve body against the pipe flange. Always confirm that the valve is fully open or closed before connecting to avoid stress on the sealing components.

Compatibility and accessories

This ball valve is compatible with standard gas pipelines and fittings designed for nominal pressure PN 5. It integrates well with other components such as pressure regulators, filters, and metering devices commonly used in gas supply lines. For optimal performance, ensure all connected fittings have matching thread specifications. Additional accessories such as sealing compounds or threaded adapters may be required if the system uses non-standard connections. Refer to the manufacturer’s guidelines for recommended combinations and installation practices.

Technical background for designers

The ball valve operates via a rotating ball with a bore aligned or perpendicular to the flow path. When the lever is turned, the ball rotates to allow or block media passage. The full-bore design minimises flow restriction, which is essential for maintaining consistent system performance. Integration into gas systems requires careful attention to pressure ratings and thermal expansion characteristics to prevent leaks or failures over time. The extended thread design also facilitates installation flexibility in complex piping arrangements.

Service and operation

Periodic inspection of the valve should focus on the integrity of the thread seals and the smooth movement of the lever. Any signs of leakage or difficulty in operation may indicate wear or contamination and require servicing. Clean the exterior with a dry cloth to remove dirt and debris. There are no specified service intervals in the provided data, so maintenance should be performed according to observed conditions and system requirements. Avoid using excessive force when operating the lever to prevent damage to the internal components.

Frequently asked questions

Can this valve be used with water instead of gas?
No, the valve is rated for gas applications at PN 5 and is not suitable for water systems unless specifically tested for such use.

Is the lever fixed in one position or can it be adjusted?
The lever is manually adjustable but does not lock in place. It must be positioned correctly during installation to match the flow direction.

What is the significance of the CW617N material designation?
CW617N refers to a specific grade of brass that is nickel-plated for enhanced corrosion resistance and mechanical strength, suitable for gas applications.

Can this valve be used in high-pressure gas systems?
It is suitable for nominal pressure PN 5. For higher pressures, a valve with a higher pressure rating should be selected.