Domestic waterworks IBO JET 100 A / 24l

Product detailed description

Domestic water pumps like the IBO JET 100 A 24L are commonly installed in single-family homes, small apartment blocks and commercial buildings with low-rise layouts. They support systems such as cold and hot water distribution, as well as small-scale irrigation or boiler feed circuits. Installers typically integrate these pumps into existing plumbing infrastructure where increased pressure or flow is required. The unit is designed to operate within standard electrical and hydraulic networks, making it suitable for retrofitting or new installations. The compact dimensions allow for placement in utility rooms, basements or dedicated pump houses.

Before installation, the installer should assess the system’s demand for flow and pressure to ensure compatibility with the pump’s specifications. The unit is particularly suited for applications where the water source is at a lower level than the point of use, such as boosting pressure from a municipal supply or a private well. It is also appropriate for supporting appliances that require stable water delivery, such as dishwashers, washing machines and solar water heating systems. The pump’s 50 m head capacity makes it suitable for multi-storey buildings with up to three floors.

Technical parameters

EAN	8585054501069
Length of inlet cable (m)	1
Maximum flow rate (l/min)	60
Pump voltage (V)	230 V
Dimensions H x W x D (cm)	68.5x60x32.5
Pump head (m)	50
Weight	15.35 kg
Code	PR_38700
Brand	AQUA OLA

The maximum flow rate of 60 l/min indicates the volume of water the pump can move per minute under normal operating conditions. This figure is essential for sizing the pump to match the system’s demand. The 50 m head means the pump can overcome vertical lift and friction losses in the piping, which is crucial when calculating the total dynamic head (TDH) for the installation. The 230 V rating ensures compatibility with standard single-phase electrical supplies found in residential and light commercial settings.

Installation and connection

The IBO JET 100 A 24L requires a secure mounting location with access to a 230 V power supply. The 1 m inlet cable length should be considered during planning to ensure sufficient reach to the nearest junction box or switchboard. The pump is typically connected using threaded fittings, and the installer must verify that all connections are tight and leak-free. A pressure gauge and isolation valves should be installed upstream and downstream for system monitoring and maintenance. Common mistakes include incorrect orientation of the pump body, failure to align the inlet and outlet ports with the system layout, and neglecting to secure the unit properly to prevent vibration-induced wear.

Compatibility and accessories

The pump is compatible with standard copper, PEX or PVC piping systems and works well with pressure tanks and expansion vessels to stabilise flow and reduce cycling. Additional components such as check valves, pressure switches and filters may be required depending on the application. These items help to protect the pump from backflow, overpressure and particulate damage. No related products are specified for this model.

Technical background for designers

The IBO JET 100 A 24L operates on a centrifugal principle, using an impeller to generate pressure and flow. The motor is sealed to prevent water ingress, ensuring long-term reliability in wet environments. The materials used are corrosion-resistant, allowing the pump to function efficiently in water with moderate mineral content. Integration into the system requires careful consideration of pipe diameters and layout to avoid excessive friction losses. The pump’s performance is influenced by factors such as water temperature, viscosity and the presence of air pockets in the system. To maximise service life, the pump should be installed in a location free from prolonged exposure to freezing temperatures.

Service and operation

Routine checks should include verifying the tightness of all connections, inspecting the motor for unusual noise or vibration and ensuring the pump is operating within its rated pressure range. No specific service intervals are provided in the technical data. If the pump shows signs of reduced performance or irregular operation, it should be isolated and inspected for blockages or mechanical wear. The unit does not require scheduled maintenance beyond these basic checks.

Frequently asked questions

Can the IBO JET 100 A 24L be used with a pressure tank?
Yes, the pump can be integrated with a pressure tank to stabilise water delivery and reduce frequent cycling. A pressure switch is recommended for automatic control.

Is the pump suitable for installation in a basement?
Yes, provided the location is dry and well-ventilated. The pump’s sealed motor protects against moisture, but prolonged exposure to high humidity should be avoided.

What type of electrical supply is required?
The pump operates on a standard 230 V single-phase supply. Ensure the circuit is protected by a suitable fuse or circuit breaker.

Can the pump handle water with high mineral content?
The pump is constructed from materials resistant to moderate mineral content. However, very hard water may require additional filtration to prevent scaling and internal wear.