Domestic waterworks IBO WZI 750 / 100l

Product detailed description

Domestic water pumps are essential components in residential and commercial water supply systems where consistent pressure and flow are required. The IBO WZI 750 100L is specifically designed for installations where a reliable water supply is critical, such as in multi-storey buildings, detached houses, or systems with long pipe runs. Installers working on these types of systems often encounter challenges related to maintaining stable pressure and flow, particularly when drawing water from a storage tank or well. This pump is suitable for integration into both new and existing water supply systems, ensuring efficient operation and minimal downtime.

When installing a domestic water pump, it is important to consider factors such as the required flow rate, system pressure, and the characteristics of the water source. The IBO WZI 750 100L is designed to handle a wide range of installation scenarios, making it a versatile solution for various building types. The pump's performance parameters must be matched to the specific requirements of the system to ensure optimal operation and longevity.

Technical parameters

Tank capacity	100 l
Inlet cable length	1 m
Maximum flow rate	48 l/min
Pump voltage	230 V
Dimensions (H x W x D)	82.5x89x50 cm
Pump head	60 m
EAN	8585054500468
Weight	20 kg
Code	PR_22631

The technical parameters of the IBO WZI 750 100L are crucial for determining its suitability for a particular installation. The 100L tank capacity ensures sufficient water storage for short-term demand, while the 60m head allows the pump to deliver water to upper floors or through long pipe runs. The maximum flow rate of 48 l/min indicates the pump's ability to supply water quickly, which is essential in systems with high demand. The 230V operating voltage is standard for most European electrical systems, ensuring compatibility with typical power supplies.

Installation and connection

Proper installation of the IBO WZI 750 100L is essential to ensure reliable operation and system efficiency. The pump should be installed in a location that allows for easy access to the inlet and outlet connections, as well as the electrical supply. The inlet connection requires a 1m supply pipe, which should be checked for any kinks or obstructions that could restrict flow. The pump's dimensions (82.5x89x50 cm) should be considered when selecting the installation location to ensure adequate space for maintenance and operation.

During installation, it is important to verify that the electrical supply matches the pump's 230V requirement. A dedicated circuit with appropriate protection should be installed to prevent overloading and ensure safety. Common installation mistakes include incorrect pipe sizing, which can lead to reduced flow or excessive pressure, and improper grounding, which can pose a safety risk. Installers should also ensure that the pump is level and securely mounted to prevent vibration and noise.

Compatibility and accessories

The IBO WZI 750 100L is compatible with standard water supply systems and can be integrated with various types of plumbing and pipe materials. It is suitable for use with copper, PVC, and PEX piping, provided the connections are properly sealed and supported. To ensure optimal performance, it is recommended to install a pressure tank, check valve, and pressure regulator in conjunction with the pump. These components help to maintain stable pressure, prevent backflow, and protect the pump from excessive wear.

When ordering the IBO WZI 750 100L, it is important to consider any additional components that may be required for the specific installation. These may include pipe fittings, valves, and electrical components such as circuit breakers or control panels. Installers should also verify that all components are compatible with the pump's specifications to ensure safe and efficient operation.

Technical background for designers

The IBO WZI 750 100L operates on a centrifugal pump principle, where the impeller creates a pressure differential to move water through the system. The pump's materials are selected for durability and resistance to corrosion, ensuring long-term reliability in a variety of water conditions. The 100L tank is designed to provide a buffer for short-term demand, reducing the frequency of pump operation and extending its service life.

When integrating the pump into a system, designers should consider the hydraulic characteristics of the installation, including pipe length, diameter, and elevation changes. These factors can significantly affect the pump's performance and must be accounted for during the design phase. Proper system design ensures that the pump operates within its optimal range, minimizing energy consumption and wear on components.

Service and operation

Regular maintenance is essential to ensure the continued performance and longevity of the IBO WZI 750 100L. Installers should periodically check the pump's electrical connections, inlet and outlet pipes, and tank for any signs of wear or damage. The pump should be inspected for leaks, unusual noise, or changes in performance, which may indicate the need for servicing. While the brief does not specify service intervals, it is generally recommended to perform routine checks at least once a year or more frequently in high-demand systems.

During operation, it is important to monitor the pump's performance and ensure that it is operating within its specified parameters. Any deviations from normal operation should be investigated promptly to prevent further damage or system failure. Installers should also ensure that the pump is properly grounded and protected from electrical surges to prevent damage to the motor or control components.

Frequently asked questions

Can the IBO WZI 750 100L be used with a pressure tank?
Yes, the pump can be used with a pressure tank to help maintain stable pressure and reduce the frequency of pump operation. A pressure tank is recommended for systems with fluctuating demand.

What type of electrical supply is required for the pump?
The pump requires a 230V electrical supply, which is standard for most European electrical systems. A dedicated circuit with appropriate protection should be installed to ensure safe operation.

Is the pump suitable for use with copper, PVC, or PEX piping?
Yes, the pump is compatible with copper, PVC, and PEX piping, provided the connections are properly sealed and supported. The choice of piping material should be based on the specific requirements of the installation.

What is the maximum head of the pump and how does it affect installation?
The pump has a maximum head of 60m, which allows it to deliver water to upper floors or through long pipe runs. This parameter should be considered when designing the system to ensure that the pump can meet the required pressure and flow requirements.