Drain water ball valve 3/4"
Code: Z.SP-20Product detailed description
The Z.SP-20 steps up to a 3/4" thread and a 14 mm ball bore, so it drains a central heating circuit faster than a 1/2" valve where there is more water to move — typical of boiler room headers, larger radiator branches or manifold drain points.
Internally it uses the same reliable construction as the rest of the range: a chrome-plated brass ball sealed with PTFE for a smooth, long-lasting shut-off, and a compression nut end that both simplifies fitting and compensates for slight misalignment in the pipework it connects to.
- Size: DN20, thread G3/4, ball bore 14 mm
- Max. pressure: 1 MPa (10 bar)
- Hydraulic strength: 2.5 ± 0.1 MPa
- Max. working temperature: 120°C
- Working media: central heating water
- Body length: 75.5 mm, net weight: 0.200 kg
- Warranty: 2 years
Additional parameters
| Category: | Ball valve |
|---|---|
| Warranty: | 2 roky |
| EAN: | 5900308730782 |
| Menovitý priemer: | DN20, G3/4" |
| Priemer guľôčky: | 14 mm |
| Maximálny tlak: | 1 MPa |
| Hydraulická pevnosť: | 2,5 ± 0,1 MPa |
| Max. prevádzková teplota: | 120 °C |
| Médium: | voda v systémoch ústredného kúrenia |
| Materiál: | mosadz, guľôčka chróm + PTFE |
| EAN: | 5900308730782 |
| Záruka: | 2 roky |
Discussion
Be the first who will post an article to this item!