ELÍZ EURO 120 IN WIFI ELZ_3554

Product detailed description

Electric water heaters like the ELIZ EURO 120 IN WIFI are commonly used in residential and commercial buildings to provide hot water for domestic use. Installers typically encounter these units in kitchens, bathrooms, and utility rooms, where they are integrated into central or point-of-use hot water systems. The unit is designed for wall mounting and is suitable for applications where remote monitoring and control are required. It supports both manual and automated operation, making it ideal for installations where energy efficiency and user convenience are priorities.

When selecting a water heater, installers must consider factors such as tank capacity, power rating, and system compatibility. The ELIZ EURO 120 IN WIFI is specifically designed for installations where a 120L capacity is required, and the 2000 W power rating ensures rapid heating. The unit is compatible with standard electrical and plumbing systems and supports integration with smart home or building management systems via WiFi.

Technical parameters

type	EURO 120 IN WIFI
power	2000 W
voltage	230 V
current	10 A
electrical protection	IP 24
water connection	1/2 inch
maximum tank pressure	6 bar
water heating time 12 - 65 °C	3.8 hours
wall mounting	yes
safety fuse	yes
weight	33 kg
product dimensions	462 x 1170 mm
tank warranty	5 years
product warranty	2 years
EAN	3800035724134
Code	ELZ_3554
Brand	ELIZ

The technical parameters of the ELIZ EURO 120 IN WIFI are essential for proper sizing and system integration. The 2000 W power rating and 230 V supply voltage indicate the electrical requirements for installation. The IP24 rating ensures protection against dust and water splashes, making it suitable for indoor use. The 1/2 inch water connection is standard for most plumbing systems, and the 6 bar maximum tank pressure must be considered when designing the hydraulic system. The 3.8-hour heating time from 12 to 65°C is a key factor in determining the unit’s suitability for specific applications.

Installation and connection

Installation of the ELIZ EURO 120 IN WIFI requires a secure wall mounting system. The unit must be mounted vertically, and the 1/2 inch water inlet and outlet must be connected to the supply and return lines using standard plumbing fittings. It is important to ensure that the electrical supply is properly grounded and that the circuit is protected by a 10 A fuse or circuit breaker. The unit must be installed in a location with adequate ventilation and away from flammable materials.

Common installation mistakes include incorrect wall mounting, which can lead to instability, and improper electrical connections, which can pose a safety risk. Installers should also verify that the water supply pressure does not exceed 6 bar and that the unit is not installed in areas with high humidity or direct water exposure. A pressure relief valve and a check valve should be installed to prevent backflow and overpressure.

Compatibility and accessories

The ELIZ EURO 120 IN WIFI is compatible with standard electrical and plumbing systems. It can be integrated with smart home systems via WiFi, allowing for remote monitoring and control. No additional accessories are required for basic operation, as the unit includes a built-in pressure relief valve and check valve. However, installers may need to order additional mounting brackets or electrical components depending on the specific installation requirements.

Technical background for designers

The ELIZ EURO 120 IN WIFI operates by heating water stored in a 120L steel tank with a zirconium enamel coating. The tank is insulated with high-density polyurethane foam, which minimizes heat loss and reduces energy consumption. The unit is equipped with an electronic thermostat that controls the heating element based on the set temperature. The Smart Control system uses a learning algorithm to optimize heating cycles based on user behavior, which can reduce energy consumption by up to 25%.

The unit is designed to integrate with both single and multiple outlet systems. The dual anode protection system, consisting of two magnesium anodes, helps prevent corrosion and extends the tank’s lifespan. The 5-year tank warranty and 2-year product warranty reflect the manufacturer’s confidence in the unit’s durability and performance. The unit is also equipped with a built-in anti-legionella function, which helps prevent bacterial growth by periodically heating the water to a high temperature.

Service and operation

Regular maintenance of the ELIZ EURO 120 IN WIFI includes checking the anode condition, verifying the electrical connections, and ensuring that the tank is free from leaks. The unit is equipped with a built-in diagnostic system that displays error codes on the control panel, making it easier to identify and resolve issues. The tank’s 5-year warranty covers any defects in the tank itself, but regular service is recommended to ensure optimal performance and longevity.

Frequently asked questions

Can the ELIZ EURO 120 IN WIFI be connected to a smart home system?
Yes, the unit is equipped with WiFi functionality, allowing it to be integrated with smart home systems for remote monitoring and control.

What is the maximum water temperature that can be set on the unit?
The unit can be set to a maximum water temperature of 75°C in the Power mode, which is suitable for applications requiring high-temperature water.

How does the Smart Control system reduce energy consumption?
The Smart Control system uses a learning algorithm to analyze user behavior over 7 days and adjust the heating cycle to match the user’s needs, which can reduce energy consumption by up to 25%.

What is the minimum operating temperature for the unit?
The unit includes a frost protection function that maintains a minimum water temperature of 5°C to prevent freezing in cold environments.

Documents for download

• Technical specifications (PDF)