Garden Ball Cap, 1/2" M, 15 mm

Product detailed description

This garden ball valve is commonly used in irrigation systems, outdoor water supply lines, and garden hose connections. It is typically installed by plumbers, irrigation technicians, and DIY users to control the flow of water in external applications. The valve is suitable for residential and commercial properties where a reliable shut-off point is required for garden taps, sprinklers, or hose bibbs. It is designed for use in systems operating at nominal pressure PN 15 and is compatible with water at temperatures ranging from 0 °C to 90 °C.

Its compact design and external thread make it suitable for integration into existing pipe systems without the need for complex modifications. The valve is often installed in conjunction with hose fittings, pressure regulators, or other irrigation components. The nickel-plated brass construction ensures resistance to corrosion and wear, making it suitable for long-term use in outdoor environments.

Technical parameters

Material	nickel-plated brass CW617N
Operating temperature	0 °C
Nominal pressure	PN 15
Diameter	15 mm
Code	I08003012
Brand	IVAR

The nominal pressure rating of PN 15 indicates that the valve is suitable for systems operating at up to 15 bar. The temperature range from 0 °C to 90 °C allows for use in both cold and warm water applications. The 15 mm hose fitting ensures compatibility with standard garden hoses and irrigation fittings. These parameters are essential for correct sizing and selection in accordance with system requirements.

Installation and connection

The valve is installed using an external thread of 1/2 inch M. Ensure that the thread is clean and free from debris before tightening. Apply a suitable thread sealant or Teflon tape to prevent leaks. The hose fitting should be connected to the 15 mm end to ensure a secure and watertight connection. During installation, verify that the valve is fully open or closed to avoid damaging the internal components. Common installation mistakes include over-tightening the thread, which can cause thread damage, and failing to align the valve correctly with the flow direction.

Compatibility and accessories

This valve is compatible with standard garden hose fittings and irrigation components. For a complete system, additional accessories such as pressure regulators, filters, or hose bibbs may be required. It is recommended to use compatible fittings and connectors to ensure a secure and leak-free installation. No related products are specified for this model.

Technical background for designers

The valve operates as a ball valve, using a spherical disc with a hole to control the flow of water. When the handle is turned, the disc rotates to either allow or block the flow. The nickel-plated brass CW617N material provides good corrosion resistance and mechanical strength, making it suitable for outdoor use. The valve is designed for integration into low-pressure water systems and should be selected based on the system's operating pressure and temperature. The service life and efficiency are influenced by the quality of installation, the use of appropriate sealants, and the absence of excessive pressure or temperature fluctuations.

Service and operation

Regular inspection of the valve for leaks and proper operation is recommended. Check the external thread for signs of wear or damage and ensure that the hose fitting is secure. No specific service intervals are provided for this model. If the valve becomes difficult to operate, it may indicate internal wear or debris accumulation and should be inspected or replaced as necessary.

Frequently asked questions

Can this valve be used in a high-pressure irrigation system?
It is suitable for systems operating at nominal pressure PN 15. For higher pressures, a different model should be selected.

Is the nickel-plated brass suitable for outdoor use?
Yes, the nickel-plated brass CW617N provides good resistance to corrosion and is suitable for long-term use in outdoor environments.

Can this valve be connected to a standard garden hose?
Yes, the 15 mm hose fitting is compatible with standard garden hoses and irrigation fittings.

What should be checked during installation?
Ensure the thread is clean and apply a suitable sealant. Check that the valve is aligned correctly with the flow direction and avoid over-tightening the connection.