Insert - reduced, 1/2" x 3/8"

Product detailed description

Reduced insert fittings are commonly used in residential and commercial plumbing systems to adapt pipe sizes during installation or repair. These fittings are essential in ensuring a secure and leak-free connection between components of different diameters. Installers and technicians often use them in heating systems, water supply lines, and sanitary installations where dimensional transitions are required. The fitting is particularly useful in tight spaces where space for additional components is limited.

When working with threaded systems, it is important to ensure that the insert is correctly sized and that the threads are compatible with the connected components. This fitting is suitable for use in systems operating under moderate pressure and temperature conditions, making it a versatile solution for a range of applications.

Technical parameters

Material	Brass CW617N, certified for potable water (ATEST)
Operating temperature	+120 °C
Nominal pressure	PN 10
Weight	0.032 kg
Code	1552G000403
Brand	IVAR

The nominal pressure rating of PN 10 indicates that the fitting is suitable for systems operating at up to 10 bar. The maximum operating temperature of +120 °C means it can be used in hot water systems and heating applications. The CW617N brass material provides good corrosion resistance and mechanical strength, making it suitable for long-term use in potable water systems.Installation and connection The fitting is installed by screwing it into the male threads of the connected components. The 1/2 inch and 3/8 inch sizes are standard for many plumbing and heating systems. It is important to ensure that the threads are clean and undamaged before installation. Apply a suitable thread sealant to prevent leaks. A common mistake is over-tightening the fitting, which can damage the threads or cause a leak. Always verify the alignment and tightness after installation.Compatibility and accessories This insert is compatible with standard brass and steel threaded components of the same size. It is typically used in conjunction with other fittings such as elbows, tees, and valves. For a complete system, additional components such as unions, couplings, and valves may be required. Related products include other IVAR threaded fittings and inserts of similar design and material.

Technical background for designers

The fitting operates by providing a mechanical connection between two threaded components of different sizes. The CW617N brass material is chosen for its durability and resistance to corrosion, making it suitable for use in potable water systems. The PN 10 rating ensures that the fitting can handle moderate pressure conditions. The maximum operating temperature of +120 °C allows it to be used in both cold and hot water systems. The design of the fitting ensures that it can be integrated into a system without requiring additional support or reinforcement.Service and operation No specific service intervals are required for this fitting. Regular visual inspections should be carried out to check for signs of corrosion, leaks, or mechanical damage. If any issues are detected, the fitting should be replaced immediately to prevent system failure. The fitting does not require routine maintenance beyond these inspections.Frequently asked questions

Can this fitting be used in potable water systems?
Yes, the fitting is certified for use with potable water and is made of CW617N brass, which is suitable for drinking water applications.

Is the fitting suitable for hot water systems?
Yes, the maximum operating temperature of +120 °C makes it suitable for use in hot water systems and heating applications.

Can this fitting be used with steel threaded components?
Yes, the fitting is compatible with standard steel threaded components of the same size, provided the threads are clean and undamaged.

What is the maximum pressure rating of the fitting?
The fitting has a nominal pressure rating of PN 10, meaning it is suitable for systems operating at up to 10 bar.