IVAR Alpex Turatec rod 16 x 2, 73016005

Product detailed description

The IVAR Alpex Turatec rod is commonly used in residential and commercial buildings for underfloor heating systems, radiator circuits and potable water distribution. It is ideal for applications requiring flexibility and resistance to thermal cycling. Installers often handle this pipe during renovation projects or new builds, particularly when integrating modern heating solutions such as radiant floor systems.

The multi-layer construction ensures structural stability and minimises heat loss. The polyethylene outer layers provide chemical resistance while the inner layer guarantees compliance with hygienic standards for drinking water. This makes it suitable for both heating and potable water applications within the same building infrastructure. Its flexibility allows for easier routing around obstacles compared to rigid piping systems.

Technical parameters

Installation and connection

Installation involves measuring, cutting and connecting the pipe using TA or RA crimping tools or press fittings. The 16 mm outer diameter requires fittings compatible with this size. Before final connections, ensure the pipe is free from kinks and bends that could restrict flow. Common errors include incorrect tool pressure during crimping, which can lead to leaks or weak joints. Always verify the fitment tightness after installation and perform a pressure test to identify potential faults early.

Compatibility and accessories

This PE-AL-PE-RT pipe is compatible with standard heating system components such as manifolds, valves and thermostats. To complete the installation, additional fittings such as elbows, tees and straight couplings are required. Crimping rings and press tools specific to TA, RA or press systems must also be available on-site. While no alternative products are listed for comparison, similar models from other manufacturers would need to meet identical pressure and temperature requirements for interchangeability.

Technical background for designers

The PE-AL-PE-RT composite structure combines the flexibility of polyethylene with the rigidity of an aluminium core. This combination allows for minimal expansion under thermal stress, reducing the risk of mechanical failure due to movement. The material is especially suited to underfloor heating systems where thermal gradients are frequent. Designers should account for the pipe’s thermal conductivity and insulation requirements to optimise system efficiency. Long-term performance depends on maintaining the specified pressure and temperature limits, as well as protecting the pipe from physical damage during installation.

Service and operation

Regular visual inspections should be carried out to detect signs of wear or leakage. The pipe does not require scheduled maintenance beyond these checks. If the system is to be decommissioned or modified, the pipe should be cut cleanly and sealed properly to prevent contamination or air ingress. There are no defined service intervals provided by the manufacturer.

Frequently asked questions

Can the IVAR Alpex Turatec rod be used for both heating and potable water?
Yes, the pipe is certified for use with potable water and is also suitable for heating applications such as underfloor and radiator systems.

Is this pipe compatible with press fitting systems?
Yes, the pipe can be joined using press fittings as well as TA and RA crimping systems.

What is the maximum operating temperature for continuous use?
The pipe is rated for continuous operation at up to +70 °C. At higher temperatures, such as +95 °C, usage must be limited to short periods.

What precautions should be taken when cutting the pipe?
Cuts should be made using a dedicated pipe cutter to ensure a clean, square edge. Avoid using sharp tools that could damage the internal layers or create burrs that interfere with fittings.