Professional preparation - inhibitor - 1%; 1l - action GEL.LONG LIFE 100
Code: 113.160.11Related products
Product detailed description
Corrosion and deposit formation in heating systems can lead to reduced efficiency and costly repairs. IVAR Long Life 100 is a corrosion inhibitor designed for use in a wide range of heating systems, including those with aluminium components and underfloor heating systems. It is a neutral formulation that helps to reduce the risk of corrosion and the formation of deposits, ensuring the long-term integrity of the system. The product is typically used in residential, commercial and industrial buildings where central heating systems are in operation. It is particularly suitable for systems where water quality may vary and where long-term chemical stability is required.
Installers and technicians working on heating systems must ensure that the correct dosage is applied based on the system’s water volume. The inhibitor is added to the system at a concentration of 1%, meaning 1 litre is required for every 100 litres of water in the system. This ensures effective protection without overuse or under-dosing, which can compromise performance. The product is intended for use in closed-loop systems and should be applied according to the manufacturer’s instructions to ensure compatibility and effectiveness.
Technical parameters
| Code | 113.160.11 |
|---|---|
| Brand | IVAR |
The technical parameters of IVAR Long Life 100 are essential for determining the correct dosage and ensuring compatibility with the system. The 1% concentration is a key factor in calculating the required volume for the system’s water content. This ensures that the inhibitor is effective in preventing corrosion and deposit formation without exceeding safe levels. The product is suitable for use in a range of system types and is not affected by the presence of aluminium components, making it a versatile solution for various heating applications.
Installation and connection
IVAR Long Life 100 is added directly to the heating system’s water supply. The product is typically introduced during the initial filling or during a system flush and refill. The dosage is calculated based on the total water volume in the system. Installers should ensure that the system is fully drained and cleaned before adding the inhibitor to avoid contamination and ensure even distribution. It is important to verify the system’s water volume to determine the correct amount of inhibitor to use. Common installation mistakes include incorrect dosing, failure to clean the system before application, and not allowing sufficient time for the inhibitor to circulate before commissioning the system.
Compatibility and accessories
IVAR Long Life 100 is compatible with all common types of heating systems, including those with cast iron, steel and aluminium components. It is also suitable for use in underfloor heating systems. No additional accessories are required for application, as the product is added directly to the system’s water. No related products are specified for use with this inhibitor.
Technical background for designers
IVAR Long Life 100 operates by forming a protective film on metal surfaces within the heating system, reducing the risk of corrosion and deposit formation. The neutral formulation ensures compatibility with a wide range of materials and system components. The inhibitor is designed to remain stable over time, maintaining its effectiveness for a recommended period of 1–3 years. The integration of the inhibitor into the system is straightforward and does not require additional equipment or modifications. The service life and efficiency of the product are influenced by the system’s water quality, temperature and operating conditions.
Service and operation
Once applied, IVAR Long Life 100 requires no regular maintenance. However, it is recommended to monitor the system for signs of corrosion or deposit formation, especially after 3 years of use. If the system is drained or refilled, the inhibitor should be reapplied at the correct concentration to maintain protection. No specific service intervals are provided in the brief, but the product is designed for long-term use without the need for frequent reapplication.
Frequently asked questions
Can IVAR Long Life 100 be used in systems with aluminium components?
Yes, IVAR Long Life 100 is suitable for use in systems with aluminium components. It is specifically designed to be compatible with a wide range of materials, including aluminium, without causing damage or degradation.
How is the correct dosage determined?
The correct dosage is determined based on the total water volume in the heating system. The product is applied at a concentration of 1%, meaning 1 litre is required for every 100 litres of water in the system.
Can IVAR Long Life 100 be used in underfloor heating systems?
Yes, IVAR Long Life 100 is suitable for use in underfloor heating systems. It is compatible with all common types of heating systems, including those with underfloor heating, and provides effective corrosion protection.
How long can IVAR Long Life 100 be used before reapplication is needed?
IVAR Long Life 100 is recommended for use over a period of 1–3 years. After this time, it is advisable to check the system for signs of corrosion or deposit formation and reapply the inhibitor if necessary.
Documents for download
Additional parameters
| Category: | Chemicals |
|---|---|
| Weight: | 1 kg |
| Posledná aktuálizacia ceny: | 09.07.2026 12:26:51 |
Discussion
Be the first who will post an article to this item!