Professional heating IVAR, Page 75
-
Pipes - heating, water, underfloor
-
Press fittings, couplings
-
Press fittings, couplings for PEX
-
Steel pipes and press fittings
-
ALPEX-GAS - for gas
-
Fittings, valves, unions
-
Threaded fittings, couplings
-
Manifolds and underfloor heating
-
Surface heating and cooling
-
Boiler and apartment measuring sets
-
Control and safety fittings
-
Controls
-
Storage tanks and hot water heaters
-
Water filtration and treatment
-
Ball valves and sanitary fittings
-
Stainless steel and flange fittings
-
Tools and protective gear
-
Solar systems
-
Heat pumps
-
Fan coils
-
Air conditioning
-
Forced ventilation with heat recovery
-
System insulation boards
-
Gas connection hoses
-
Fire and smoke detectors
-
Servo drives and valves
-
DAB pumping technology
Product sorting
List of products
The IVAR IVC77.18 is a short offset fitting for use in heating, fire protection,...
The IVAR IVC77.22 is a short offset fitting for press-fit installation in heating,...
The IVAR IVN77.15 is a stainless steel shorter recoil fitting designed for use in...
The IVAR IVN77.18 shorter recoil fitting is designed for use in sanitary, heating...
The IVAR IVN77.22 is a shorter recoil press fitting with an internal thread,...
The IVAR IVN77.28 shorter recoil fitting is designed for heating and plumbing...
Designed for concealed installation in plumbing and heating systems, this shut-off...
Designed for concealed installation in plumbing and heating systems, this shut-off...
This concealed press shut-off valve is designed for use in sanitary water supply...
The Siemens Direct Zone Valve Set DN15 is designed for use in heating systems by...
Designed for heating system zoning, this Siemens DN20 direct zone valve set...
The Siemens Direct Zone Valve Set DN25 is a complete solution for heating system...
The Siemens RDF800 is an electronic fan-coil controller for two- or four-pipe...
The Siemens WFM501-E000H0 heat meter is a compact mechanical device for measuring...
The Siemens WFM502-E000H0 is a mechanical heat meter designed for heating systems...
The Siemens WFM503-J000H0 is a compact heat meter for heating systems with a...
The Siemens Mechanical Thermostat RAB11 is designed for use with 2-pipe fan-coil...
The Siemens RAB21 mechanical thermostat is designed for use with 2-pipe fan-coil...
The Siemens Mechanical Thermostat RAB31 is intended for use with 4-pipe fan coil...
Designed for installers and technicians, the Siemens room thermostat with switch...
The Siemens SSB819 is a 3-position servo drive designed for use with DN20 valves...
Designed for installers working on heating systems, the Siemens RDH100RF/SET is a...
Designed for installers and service technicians, the Siemens RAA31 room thermostat...
Designed for installers and technicians, the Siemens Space Thermostat with Switch...
The Siemens QAA32 spatially separated temperature sensor is intended for use with...
The Siemens RAB91 standalone fan speed switch is designed for HVAC system control...
This three-way valve set with motor drive is intended for professional heating and...
Designed for heating and plumbing professionals, the Siemens SFA21 DN20 three-way...
This three-way valve set combines a PN16 brass valve body with an electric...
Designed for heating and plumbing systems, the Siemens SFA21 DN25T three-way set...
Designed for heating system control, this three-way set combines a VXI46 diverter...
Designed for heating and sanitary applications, this three-way set combines a DN20...
The Siemens three-way set with motor drive SUA21 DN25 is designed for use in...
The Siemens T230-C05C ultrasonic heat meter is designed for measuring thermal...
Designed for installers and building managers, the Siemens T230-C230-C21C...
The Siemens T230-C36C is an ultrasonic heat and cold meter with a nominal flow...
The Siemens Wired Separate Temperature Sensor QAP1030/UFH is designed for electric...
Designed for installers and technicians working with dosing systems, the IVAR...
The CSR 1 is a modular control and signal unit for use in industrial pressure...
This brass sleeve is designed for use with IVAR PRESS fittings in gas and plumbing...
