PUSH Wall - 3/4 "x20 IVAR.PUSH-N

Product detailed description

This Push Wall fitting is commonly used in residential and commercial building services for connecting ALPEX piping to threaded components such as valves, manifolds or meter connections. It eliminates the need for crimping tools, reducing installation time and complexity. The fitting is suitable for domestic hot and cold water systems, central heating circuits and low-pressure gas applications. It ensures leak-free connections in systems with fluctuating temperatures and pressures, making it ideal for both new builds and renovations.

Installers typically use this component in compact spaces where traditional compression or crimp fittings are impractical. Its one-piece design allows for rapid assembly while maintaining structural integrity under normal operating conditions. The fitting is especially useful in areas requiring frequent maintenance or adjustments, such as underfloor heating manifolds or kitchen plumbing junctions.

Technical parameters

Material	Brass CW617N
Operating temperature	+120 °C
Nominal pressure	PN 10
EAN	4013960355697
Weight	0.153 kg
Code	87320723
Brand	IVAR

The nominal pressure rating of PN 10 indicates suitability for low-pressure systems, typically up to 10 bar. The maximum operating temperature of 120°C makes it compatible with hot water supply lines and heating circuits. The material selection—brass CW617N—ensures resistance to corrosion and mechanical stress. These parameters guide correct sizing and selection based on the system’s thermal and hydraulic demands.Installation and connection To install the Push Wall fitting, first ensure the ALPEX pipe is cut cleanly and free of burrs. Insert the pipe fully into the fitting until it seats against the stop. The fitting connects directly to an external thread without additional tools. Verify that the pipe is fully inserted and the sealing ring is undamaged. Common installation errors include insufficient insertion depth or using damaged sealing rings, which can lead to leaks. Always double-check the alignment of the fitting with the threaded component before tightening.Compatibility and accessories This Push Wall fitting is specifically designed for use with ALPEX pipes of appropriate diameter. It is compatible with standard external threads and requires no additional tools for installation. For complex systems, consider using complementary components such as straight couplings, elbows or T-junctions from the same product range. Ensure all components are from the same manufacturer to maintain system integrity and avoid incompatibility issues.Technical background for designers The Push Wall fitting operates using a push-fit mechanism that relies on a spring-loaded sleeve and EPDM sealing ring to create a watertight connection. The brass body provides durability and resistance to thermal expansion, while the stainless steel sleeve ensures long-term stability. This design integrates seamlessly into systems with fluctuating pressures and temperatures. The service life depends on proper installation, environmental conditions and regular inspection for wear or damage. Avoid using in aggressive chemical environments unless specified by the manufacturer.Service and operation During operation, inspect the fitting periodically for signs of leakage or wear. Check that the sealing ring remains intact and the sleeve is not deformed. No scheduled maintenance is required beyond visual inspections during routine system checks. In case of suspected failure, disconnect the fitting carefully and replace the affected component. Always follow the manufacturer’s guidelines for disassembly and reassembly to avoid damaging the system.Frequently asked questions

Can the Push Wall 3/4 inch x 20 be used for hot water?
Yes, it is rated for a maximum operating temperature of 120°C, making it suitable for hot water systems.

Is a crimping tool required for installation?
No, the fitting connects directly to an external thread without the need for additional tools.

What materials are used in the construction of the fitting?
The body is made of brass CW617N, the sleeve is stainless steel, and the sealing ring is EPDM.

Can this fitting be used in gas applications?
It is suitable for low-pressure gas systems, provided the gas type and operating conditions align with the manufacturer’s specifications.