Submersible sludge pump IBO FURIATKA 1100 with crusher

Product detailed description

This submersible sludge pump is commonly used in residential and commercial settings where dewatering of contaminated or solid-laden water is required. Installers typically deploy it in flooded basements, septic tanks, and surface water sources such as rivers, ponds, and swimming pools. The pump is designed to handle suspended solids and fibrous materials, making it suitable for applications involving greywater, blackwater, and industrial wastewater. It is often integrated into drainage systems, emergency dewatering setups, and pre-treatment units for septic systems. The pump’s compact dimensions and submersible design allow for installation in confined spaces, and its electrical connection is straightforward for integration into standard electrical systems.

When selecting this model, the installer must consider the hydraulic requirements of the system, including the required head and flow rate. The pump is not suitable for abrasive media or high-temperature environments beyond the specified limits. It is essential to verify the compatibility of the pump with the electrical supply and the presence of a float switch for automatic level control. The pump’s dimensions and cable length should also be considered for access and positioning in the installation site.

Technical parameters

EAN	5907222763285
Length of power cable (m)	9
Maximum flow rate (l/min)	300
Pump voltage (V)	230 V
Dimensions H x W x D (cm)	47x26
Pump head (m)	15
Weight	23 kg
Code	PR_38967
Brand	IBO

The maximum flow rate of 300 l/min and a head of 15 m are key parameters for determining the pump’s suitability for a specific application. The DN 50 mm discharge connection must be matched with the piping system. The 230 V supply voltage requires a standard single-phase electrical connection. The float switch ensures automatic operation based on water level, reducing the need for manual intervention. The cable length of 9 m allows for flexible positioning of the pump within the tank or sump.

Installation and connection

Installation begins with verifying the condition of the tank or sump, ensuring it is clean and free of sharp objects that could damage the pump casing. The pump should be lowered into the water using the cable or a separate lifting device to avoid strain on the electrical connections. The discharge pipe must be connected to the pump’s DN 50 mm outlet using a compatible flange or threaded coupling. The float switch should be adjusted to the desired water level, ensuring it activates the pump before overflow occurs. A residual current device (RCD) is recommended for electrical safety, though not specified in the brief.

Common installation mistakes include incorrect positioning of the pump too close to the tank wall or bottom, which can cause sediment buildup and reduce efficiency. Overlooking the need for a secure electrical connection or failing to ground the pump can pose safety risks. It is also important to ensure the pump is fully submerged to prevent dry running, which can damage the motor and seals.

Compatibility and accessories

This submersible sludge pump is compatible with standard DN 50 mm discharge piping and 230 V electrical systems. It is typically used in conjunction with a control panel for the float switch and a residual current device (RCD) for safety. Additional accessories may include a lifting rope, a protective cover for the pump, and a check valve to prevent backflow. No related products are listed in the brief, but the pump may be used with other IBO models for larger systems or combined with filtration units for pre-treatment of the pumped water.

Technical background for designers

The IBO FURIATKA 1100 operates on a centrifugal pump principle, with an integrated cutter to macerate fibrous materials and solids. The pump motor is sealed within the housing to prevent water ingress, and the impeller is designed to handle suspended solids without clogging. The materials used are suitable for the specified pH range (6–9) and temperature limits (35 °C for the pumped liquid, 70 °C for ambient conditions). The pump is intended for intermittent operation, and its efficiency is influenced by the viscosity of the pumped medium and the presence of abrasive particles. The design allows for integration into both new and existing drainage systems, with the float switch providing automatic control based on water level.

The service life of the pump depends on regular maintenance and the operating conditions. The motor and mechanical seals are critical components that require protection from dry running and overheating. The pump’s compact design and submersible construction make it suitable for installation in sumps and tanks with limited space, but it is not intended for continuous operation in high-solids environments without periodic inspection.

Service and operation

Regular inspection of the pump is recommended to ensure it remains free of blockages and that the float switch functions correctly. The pump should be removed periodically for visual inspection of the impeller and cutter for wear or damage. No specific service intervals are provided in the brief, but it is advisable to follow the manufacturer’s guidelines for maintenance. The pump should be disconnected from the power supply before any inspection or cleaning. If the pump fails to start or shows reduced performance, the float switch, electrical connections, and impeller should be checked for faults.

Frequently asked questions

Can the IBO FURIATKA 1100 be used in septic tanks?
Yes, the pump is suitable for septic tanks as it is designed to handle sewage sludge and contaminated water. The built-in cutter helps to macerate solids and prevent clogging.

What is the maximum depth at which the pump can be submerged?
The pump is designed for submersion in water, but the maximum depth is not specified in the brief. It is recommended to follow the manufacturer’s technical data sheet for detailed information.

Is the float switch adjustable for different water levels?
Yes, the float switch can be adjusted to activate the pump at the desired water level. This allows for customized operation depending on the application.

Can the pump be used for continuous operation?
The pump is suitable for intermittent operation. Continuous use may require additional cooling or monitoring to prevent overheating of the motor and seals.