T - piece, 1/2" F x 1/2" F x 1/2" M

Product detailed description

This T-piece is commonly used in residential and commercial heating systems to connect radiators, sanitary appliances or electric heating elements. It is suitable for installation in central heating circuits where a combination of threaded and soldered connections is required. The component is ideal for connecting to existing pipe systems that use a mix of female and male threaded fittings. Installers often use it in bathroom installations or in systems where a branch connection is needed for a heating element or a secondary circuit.

The T-piece allows for the integration of a heating element or a secondary branch into the main heating circuit. It is particularly useful in systems where a combination of soldered and threaded connections is necessary. The installation is straightforward, but attention must be paid to the correct orientation and sealing of the connections to ensure a leak-free system.

Technical parameters

Installation and connection

The T-piece is available with two female threaded connections (1/2 inch F) and one male threaded connection (1/2 inch M). Before installation, ensure that the threads are clean and free of debris. Apply a suitable sealing compound or PTFE tape to the male thread to prevent leaks. The soldered connection must be prepared with a clean and dry surface before applying flux and solder. A common mistake is not sealing the male thread properly, which can lead to leaks under pressure. Always check the alignment of the T-piece to avoid stress on the connections.

Compatibility and accessories

This T-piece is compatible with standard copper or steel piping systems and can be used with electric heating elements or radiators. Additional components such as sealing compounds, PTFE tape, and soldering materials may be required for installation. No specific related products are required for this model.

Technical background for designers

The T-piece functions as a branch connection in the heating circuit, allowing the flow of heated water or steam to be directed to a secondary component such as a heating element or a radiator. The CW617N chromed brass material is resistant to corrosion and provides good thermal conductivity. The PN 10 rating ensures that the component can handle the typical pressures found in central heating systems. The operating temperature of +120°C allows it to be used in both low-temperature and high-temperature systems. The longevity of the component depends on the quality of the installation and the maintenance of the sealing surfaces.

Service and operation

Regular inspection of the connections is recommended to ensure there are no leaks. If a leak is detected, the affected connection should be disassembled, cleaned and resealed. No specific service intervals are provided for this component. The chromed brass material requires no special maintenance but should be kept clean to prevent the accumulation of dirt or debris.

Frequently asked questions

Can the T-piece be used with electric heating elements?
Yes, it is suitable for connecting to electric heating elements in combination with standard heating circuits.

Is the T-piece compatible with copper piping?
Yes, the soldered connection allows for a secure and durable connection to copper piping.

What is the maximum operating temperature of the T-piece?
The maximum operating temperature is +120°C, making it suitable for high-temperature heating systems.

Can the T-piece be used in steam systems?
It is suitable for use in steam systems provided the operating temperature and pressure are within the specified limits.