T-piece press - PPSU - reduced, 32 x 16 x 26

Product detailed description

The reduced press T-piece is commonly used in residential and commercial heating and plumbing systems to connect pipes of different diameters. It is particularly suited for applications where space is limited and a compact connection is required. Installers and technicians working with ALPEX pipe systems will find this fitting essential for creating branch connections in press-fitted pipe networks. The fitting is designed for use in systems operating at a maximum temperature of 120°C and a nominal pressure of PN 10.

Typical installation scenarios include underfloor heating systems, central heating circuits, and domestic hot water distribution. The fitting is suitable for use in both new builds and renovation projects where press-fitted connections are preferred for their speed and reliability. The PPSU material ensures compatibility with hot water and heating media, while the stainless steel clamp and EPDM sealing provide a durable and leak-free connection.

Technical parameters

Material	Plastic PPSU
Operating temperature	+120 °C
Nominal pressure	PN 10
EAN	4013960175189
Weight	0.072 kg
Code	88632336
Brand	IVAR

The nominal pressure rating of PN 10 indicates that the fitting is suitable for systems operating at a maximum pressure of 10 bar. The operating temperature limit of +120°C means it is suitable for hot water and heating applications. These parameters are essential for correct sizing and selection, ensuring the fitting is compatible with the system's operating conditions and media.

Installation and connection

The installation process involves preparing the ALPEX pipes to the correct length and ensuring the pipe ends are clean and free from debris. The press T-piece is then positioned over the pipe ends, and the stainless steel clamp is secured using a press tool. It is important to verify that the clamp is fully seated and that the EPDM sealing is undamaged before pressing. Common installation mistakes include using incorrect press tools or failing to check the pipe ends for burrs or damage, which can compromise the seal and lead to leaks.

Compatibility and accessories

This T-piece is specifically designed for use with ALPEX press-fitted pipe systems. It is compatible with pipes of different diameters, as indicated by the dimensions 32 x 16 x 26. To complete the installation, the appropriate press tool and stainless steel clamps must be used. No additional fittings or accessories are required for standard installations.

Technical background for designers

The press T-piece operates by creating a mechanical and hydraulic seal between the pipe and the fitting using a stainless steel clamp and EPDM sealing. The PPSU material is chosen for its high-temperature resistance and chemical stability, making it suitable for use with hot water and heating media. The fitting integrates into the system by allowing the creation of a branch connection without the need for additional valves or adapters. The service life and efficiency of the fitting are influenced by the quality of the press connection, the condition of the sealing, and the system's operating conditions.

Service and operation

No regular maintenance is required for this fitting during normal operation. However, it is recommended to periodically inspect the press connection for signs of wear or damage, particularly in high-temperature or high-pressure environments. Any visible damage to the sealing or clamp should be addressed immediately to prevent leaks. There are no specified service intervals for this fitting.

Frequently asked questions

Can the T-piece be used with other pipe materials besides ALPEX?
No, the fitting is specifically designed for use with ALPEX press-fitted pipes and is not compatible with other pipe materials.

Is it possible to reuse the stainless steel clamp after installation?
No, the clamp is a one-time-use component and must be replaced with a new one for each installation to ensure a secure and leak-free connection.

Can the fitting be used in systems with higher pressure than PN 10?
No, the fitting is rated for a maximum pressure of PN 10 and should not be used in systems operating beyond this limit.

What is the maximum temperature the fitting can withstand?
The fitting is suitable for use in systems with a maximum operating temperature of +120°C.