T-piece press - reduced, 32 x 18 x 32

Product detailed description

Press T-pieces are essential components in the installation of press-fitted pipe systems, particularly in heating and plumbing applications. They allow for the branching of flow within a system without the need for additional valves or fittings. This model is commonly used in residential and commercial buildings where ALPEX pipes are employed for their durability and ease of installation. The reduced branch provides flexibility in system design, enabling the connection of smaller-diameter pipes to larger ones. Installers working with this component must ensure correct alignment and secure pressing to maintain system integrity and prevent leaks.

Such fittings are typically found in central heating systems, underfloor heating, and hot water distribution systems. The ability to connect different pipe sizes makes them suitable for adapting to existing layouts or integrating new components into a system. The operating conditions must be carefully considered to ensure the fitting performs reliably under the expected load and temperature.

Technical parameters

Material	nickel-plated brass CW617N
Operating temperature	+120 °C
Nominal pressure	PN 10
Weight	0.41 kg
Code	512060
Brand	IVAR

The nominal pressure rating of PN 10 indicates that the fitting is suitable for systems operating at up to 10 bar pressure. The maximum operating temperature of +120 °C makes it compatible with hot water and heating circuits. These parameters are critical for determining the suitability of the fitting in a given application and for ensuring that the system remains within safe operating limits. The material, nickel-plated brass CW617N, provides good corrosion resistance and mechanical strength, which is essential for long-term performance in pressurised systems.

Installation and connection

Installation of the press T-piece requires the use of a compatible pressing tool and pressing dies of type B-F-TH. The connection sizes are 32 mm, 18 mm, and 32 mm, allowing for the connection of ALPEX pipes of these diameters. The installer must ensure that the pipe ends are clean and free from burrs before inserting them into the fitting. The pressing procedure should be carried out according to the manufacturer's instructions to achieve a secure and leak-free connection. Common installation mistakes include incorrect alignment of the pipe ends, insufficient pressing force, and the use of incompatible pressing tools, all of which can compromise the integrity of the joint.

Compatibility and accessories

This press T-piece is specifically designed for use with ALPEX pipes and requires the appropriate pressing tools and dies for installation. The fitting includes a stainless steel sleeve and an EPDM sealing ring, which are integral to the pressing process and ensure a tight seal. No additional accessories are required for standard installation. The compatibility with other components in the system depends on the overall design and the use of compatible materials and connection methods.

Technical background for designers

The operating principle of the press T-piece relies on the deformation of the brass body around the inserted pipe, creating a mechanical and hydraulic seal. The nickel-plated brass CW617N offers good resistance to corrosion and wear, making it suitable for use in both hot and cold water systems. The EPDM sealing ring provides additional sealing and compensates for minor misalignments. The integration of the fitting into the system depends on the flow requirements and the pressure conditions. The service life and efficiency of the fitting are influenced by the quality of the installation, the operating conditions, and the compatibility with other system components.

Service and operation

Once installed, the press T-piece requires minimal maintenance. There are no service intervals specified for this component, as it is designed for long-term use under normal operating conditions. Regular inspections should be carried out to check for signs of leakage, corrosion, or mechanical damage. Any issues should be addressed by replacing the affected component. The system should be depressurised before any inspection or maintenance work is carried out to ensure safety.

Frequently asked questions

Can this press T-piece be used with other types of pipe besides ALPEX?
No, this model is specifically designed for ALPEX pipes and requires the appropriate pressing tools and dies for installation.

Is it possible to use this fitting in a system with a higher operating temperature than +120 °C?
No, the maximum operating temperature is specified as +120 °C. Exceeding this limit may compromise the integrity of the fitting and the sealing materials.

What pressing tool is required for this T-piece?
A pressing tool compatible with pressing dies of type B-F-TH is required to ensure a secure and leak-free connection.

Can the EPDM sealing ring be replaced separately?
No, the sealing ring is an integral part of the fitting and cannot be replaced separately. If damage is detected, the entire fitting should be replaced.