T-piece press - reduced, 32 x 26 x 32

Product detailed description

Press T-pieces are essential components in the installation of heating and plumbing systems where branching of pipe runs is required. This type of fitting is commonly used in residential and commercial buildings, including underfloor heating systems, domestic hot and cold water distribution, and central heating circuits. Installers working with ALPEX pipes will find press fittings a reliable and efficient solution for creating leak-tight connections without the need for soldering or threading. The reduced configuration of this T-piece allows for the connection of pipes with different diameters, making it a versatile component in system design and expansion.

When installing press T-pieces, it is important to ensure that the pipe ends are clean and free from burrs. The fitting must be aligned correctly with the pipe before pressing, and the press tool must be set to the correct pressure and stroke length for the specific fitting type. This ensures a secure and durable connection that meets the required pressure and temperature ratings. The fitting is designed for use with ALPEX pipes, which are known for their flexibility and resistance to corrosion, making them suitable for a wide range of applications in both new and retrofit installations.

Technical parameters

Material	Nickel-plated brass CW617N
Operating temperature	+120 °C
Nominal pressure	PN 10
Weight	0.414 kg
Code	512018
Brand	IVAR

The technical parameters of the IVAR press T-piece 512018 are essential for correct system design and component selection. The nominal pressure rating of PN 10 indicates that the fitting is suitable for systems operating at up to 10 bar pressure. The maximum operating temperature of +120°C makes it suitable for hot water and heating applications. The material, nickel-plated brass CW617N, ensures good mechanical strength and corrosion resistance, while the EPDM sealing material provides a reliable seal under varying thermal conditions.

Installation and connection

The IVAR press T-piece 512018 is installed using a compatible press tool that applies the required force to the fitting’s clamping sleeve. The connection sizes are 32 mm, 26 mm, and 32 mm, allowing for the connection of ALPEX pipes of different diameters. Before installation, the installer should verify that the pipe ends are cut square and free from debris. The fitting must be aligned with the pipe axis to prevent misalignment and stress on the connection. Common installation mistakes include using the wrong press tool or applying insufficient pressure, which can lead to leaks or premature failure of the fitting.

Compatibility and accessories

This press T-piece is specifically designed for use with ALPEX pipes and must be used with the appropriate press tools and clamping sleeves. The fitting is compatible with press tools of type B-F-TH. No additional components are required for installation, but it is important to ensure that the press tool is correctly calibrated and maintained. The nickel-plated brass body and EPDM sealing material are compatible with the materials used in ALPEX pipe systems, ensuring long-term reliability and performance.

Technical background for designers

The operating principle of the press T-piece is based on the mechanical deformation of the clamping sleeve when pressed onto the pipe. The sleeve is made of stainless steel and is designed to deform plastically around the pipe, creating a tight and durable connection. The nickel-plated brass body provides good resistance to corrosion and mechanical wear, making it suitable for use in both dry and humid environments. The EPDM sealing material is compatible with the thermal expansion and contraction of the pipe, ensuring a consistent seal over time. The nominal pressure and temperature ratings are determined by the mechanical properties of the materials and the design of the fitting, ensuring that it can withstand the stresses encountered in typical heating and plumbing applications.

Service and operation

The IVAR press T-piece 512018 requires no regular maintenance under normal operating conditions. However, it is important to inspect the fitting periodically for signs of mechanical damage, corrosion, or leakage. If a leak is detected, the fitting should be replaced immediately to prevent further damage to the system. The fitting is designed for long-term use and does not require scheduled service intervals. Proper installation and adherence to the manufacturer’s specifications are key to ensuring the longevity and performance of the fitting.

Frequently asked questions

Can the IVAR press T-piece 512018 be used with other types of pipe besides ALPEX?
No, this fitting is specifically designed for use with ALPEX pipes and must not be used with other types of pipe materials or systems.

Is the press T-piece suitable for use in high-temperature heating systems?
Yes, the fitting is rated for a maximum operating temperature of +120°C, making it suitable for use in heating systems and hot water applications.

Can the fitting be used in systems with nominal pressure higher than PN 10?
No, the fitting is rated for a nominal pressure of PN 10 and must not be used in systems operating at higher pressures.

What press tool types are compatible with this fitting?
The fitting is compatible with press tools of type B-F-TH. It is important to use the correct tool to ensure a secure and leak-tight connection.