T-piece PUSH - female thread - 16x1/2 "Fx16 IVAR.PUSH-TF

Product detailed description

This T-piece is used in residential and commercial plumbing systems for connecting ALPEX pipes to threaded components without the need for crimping tools. It is commonly installed in heating, hot water, and sanitation systems where push-fit connections are required for efficiency and ease of installation. The fitting ensures a secure and leak-free connection in systems operating under moderate pressure and temperature conditions.

The design is particularly suited for applications where space is limited and traditional crimping methods are impractical. The push-fit mechanism allows for rapid installation, reducing downtime and labor costs. The fitting is compatible with standard ALPEX piping and can be integrated into systems that require a combination of push-fit and threaded connections.

Technical parameters

The operating temperature of +120°C makes this fitting suitable for hot water and heating applications. The PN 10 pressure rating indicates it can handle moderate hydraulic loads typical of domestic and light commercial systems. The material selection ensures resistance to corrosion and mechanical stress, making it reliable for long-term use in pressurized environments.

Installation and connection

To install, insert the prepared ALPEX pipe into the push-fit side of the fitting until it reaches the stop mark. Ensure the pipe is fully seated and the internal sealing mechanism is engaged. Connect the threaded side to an external 1/2 inch female thread using standard tightening methods. Check that the pipe is free from burrs and contaminants before insertion to prevent sealing issues. Common installation errors include insufficient pipe insertion, incorrect thread engagement, and using damaged or contaminated pipe ends.

Compatibility and accessories

This T-piece is designed for use with ALPEX piping systems and is compatible with other IVAR PUSH fittings and components. For complete system integration, ensure that all connected fittings and valves are rated for the same operating conditions. No additional accessories are required for standard installation, but system-specific components such as valves or pressure regulators may be needed depending on the application.

Technical background for designers

The push-fit mechanism relies on a stainless steel clamping ring and EPDM sealing to create a secure connection between the pipe and fitting. The brass CW617N body provides mechanical strength and resistance to thermal expansion. The fitting integrates into the system by allowing a direct connection to threaded components while maintaining the benefits of push-fit installation. The service life and efficiency are influenced by the quality of the pipe preparation, correct installation, and adherence to operating limits such as temperature and pressure ratings.

Service and operation

Regular inspection of the connection for signs of leakage or wear is recommended. No scheduled maintenance is required for this fitting, but it should be checked during routine system inspections. If a leak is detected, the fitting should be replaced immediately. Ensure that the system is depressurized before any inspection or maintenance work is carried out.

Frequently asked questions

Can this T-piece be used with copper or other pipe materials?
No, it is specifically designed for use with ALPEX piping and may not provide a secure connection with other materials.

Is it suitable for use in high-pressure systems?
No, the PN 10 rating means it is appropriate for systems with moderate pressure levels only.

Can the fitting be reused after disassembly?
No, the sealing components are designed for single use and should be replaced after each disassembly to ensure a leak-free connection.

What is the maximum operating temperature for this fitting?
The maximum operating temperature is +120°C, as specified in the technical parameters.