Water ball valve TYTAN with butterfly handle and compression nut 1"

Product detailed description

This quarter-turn ball valve is commonly used in residential, commercial, and industrial settings to control the flow of hot and cold water in central heating and plumbing systems. It is often installed in boiler circuits, underfloor heating manifolds, and domestic hot water lines. Installers typically use this valve in applications requiring frequent manual shut-off, such as for maintenance or isolation of specific zones. Its compact design and butterfly handle make it suitable for tight spaces where full levers would be impractical.

The valve is constructed to meet the demands of both heating and potable water systems. It is suitable for installation in dry or wet environments and can be integrated into systems operating within the specified temperature and pressure range. The butterfly handle provides tactile feedback for the open or closed position, which is particularly useful in systems with multiple valves where visual confirmation is needed.

Technical parameters

Installation and connection

Before installation, verify that the pipe threads are clean and undamaged. The valve connects via female-female threaded fittings (F-F) with a G1 thread size. Apply a suitable sealing compound or PTFE tape to the male thread to ensure a leak-free connection. Tighten the compression nut securely but avoid over-tightening, which could damage the sealing surface or cause thread stripping.

• Use a wrench to secure the compression nut after aligning the valve with the pipe.
• Ensure the butterfly handle is positioned for easy access and does not interfere with adjacent components.
• After installation, perform a visual inspection for leaks and test the valve operation manually to confirm smooth quarter-turn movement.

Common installation errors include using incorrect sealing materials, misalignment of the valve body, and failure to check the direction of flow. Always confirm the flow direction indicated on the valve body before tightening the connections.

Compatibility and accessories

This valve is compatible with standard water supply and central heating systems that operate within the stated pressure and temperature limits. It is suitable for use with copper, steel, and plastic pipes with appropriate threaded connections. No additional accessories are required for basic installation; however, sealing tape or compound should be used to ensure a watertight seal.

When integrating into larger systems, ensure that the valve is compatible with other components such as flow meters, expansion vessels, and circulating pumps. There are no alternative models or related products listed for this item.

Technical background for designers

The valve operates via a quarter-turn mechanism, where a chrome-plated ball inside the body rotates to open or close the flow path. The PTFE sealing material provides a durable and low-friction seal against the ball. The brass body offers good corrosion resistance and mechanical strength, making it suitable for long-term use in water systems.

When designing a system, consider the valve’s compact size and the need for manual operation. The butterfly handle is more space-efficient than a full lever but may require more frequent manual adjustments. The valve can be integrated into control circuits or used as a manual isolation device depending on the system requirements.

System efficiency and service life depend on proper installation, correct alignment, and regular checks for wear or leakage. The valve is not intended for continuous throttling and should be used only for full open or closed positions.

Service and operation

Regular visual inspections are recommended to check for signs of corrosion, leakage, or handle stiffness. Ensure that the valve operates smoothly with no resistance during the quarter-turn motion. No scheduled maintenance is required according to the manufacturer’s specifications. If the valve becomes difficult to turn or shows signs of leakage, it should be replaced.

During operation, avoid using excessive force when turning the handle, as this may damage the internal components. The valve is not designed for throttling and should be operated fully open or closed. No service intervals are specified in the provided data.

Frequently asked questions

Can the valve be used in hot water systems?
Yes, the valve is suitable for hot water systems with a maximum operating temperature of 120°C.

Is the valve suitable for use with plastic piping?
Yes, as long as the plastic pipe has a compatible G1 thread and is installed correctly with the compression nut and sealing material.

Does the butterfly handle provide a clear indication of the open or closed position?
Yes, the butterfly handle is designed to align with the flow direction when open and perpendicular when closed, providing a clear visual indication.

Can this valve be used in a high-pressure water supply system?
Yes, the valve is rated for nominal pressures between 15 and 25 bar, making it suitable for most water supply systems.