Water ball valve TYTAN with union and compression nut 1", female-male

Product detailed description

This 1 inch water ball valve is commonly used in residential and commercial heating and plumbing systems. It is suitable for installation in hot and cold water distribution lines, including central heating circuits and domestic water supply systems. The valve allows for quarter-turn operation to regulate or isolate the flow of water, making it a reliable choice for installers working on pipe networks that require frequent maintenance or isolation. The presence of a union nut allows for disconnection and replacement without cutting the pipe, which is particularly useful in tight or hard-to-reach spaces.

Typical applications include installation in underfloor heating manifolds, boiler circuits, and domestic hot and cold water lines. The valve is often found in systems where maintenance access is limited, and the ability to remove or replace the valve without pipe cutting is essential. It is compatible with copper, steel, and plastic piping systems, and its robust construction ensures long-term reliability in both new and retrofit installations.

Technical parameters

Connection size	1
Thread	G1
Connection type	F-M with union
Nominal pressure	30 bar
Maximum operating temperature	120 °C
Body material	brass
Ball material	chrome-plated brass
Sealing material	PTFE
Net weight	0.585 kg
EAN	5900308734315
Warranty	5 years
Code	ZKWSD-PP-25
Brand	Hydroland

The nominal pressure of 30 bar indicates the valve's ability to handle high-pressure conditions typical in central heating and pressurised water systems. The maximum operating temperature of 120°C makes it suitable for hot water applications, including heated floor systems and domestic hot water circuits. The 1 inch (G1) connection ensures compatibility with standard pipe sizes in European plumbing and heating systems. These parameters are essential for correct sizing and selection to ensure the valve performs reliably under expected operating conditions.

Installation and connection

Installation of the TYTAN water ball valve with union and compression nut involves threading the valve into the pipe system using the G1 female-male connection. The union nut allows for disassembly without cutting the pipe, which is useful for maintenance or replacement. Installers should ensure that the threads are clean and free of debris before tightening the union nut. A thread sealant or PTFE tape may be applied to the male thread to ensure a leak-free connection. The valve should be installed in a position that allows for easy access to the union nut and the operating handle. Common installation mistakes include over-tightening the union nut, which can damage the threads or cause leaks, and failing to align the valve correctly with the flow direction.

Compatibility and accessories

This valve is compatible with standard 1 inch (G1) pipe systems and is often used in conjunction with other TYTAN valves and fittings. When installing in a new system, it is recommended to check the compatibility of the valve with other components such as manifolds, pipe insulation, and control systems. No additional accessories are required for basic installation, but in some cases, a thread sealant or PTFE tape may be used to enhance the seal. For more complex systems, it may be necessary to use additional fittings or isolation components to ensure proper system function and safety.

Technical background for designers

The TYTAN water ball valve operates on a quarter-turn principle, where the ball inside the valve body rotates to open or close the flow path. The ball is made from chrome-plated brass, which provides resistance to corrosion and wear. The valve body is also made from brass, offering good mechanical strength and thermal conductivity. The PTFE sealing material ensures a tight seal and low friction during operation. The valve is designed to integrate into heating and plumbing systems where it can be used to isolate sections of the system for maintenance or repair. The service life and efficiency of the valve are influenced by the operating conditions, including temperature and pressure, as well as the quality of the installation and maintenance practices.

Service and operation

Regular inspection of the valve is recommended to ensure that it operates smoothly and without leaks. The union nut should be checked for tightness, and any signs of corrosion or wear should be addressed promptly. The operating handle should be tested to ensure that it moves freely and that the valve opens and closes without resistance. If the valve is used in a high-temperature or high-pressure application, it is important to monitor the system conditions to ensure that they remain within the specified limits. The manufacturer provides a 5-year warranty, which covers defects in materials and workmanship under normal operating conditions.

Frequently asked questions

Can the TYTAN water ball valve be used in hot water systems?
Yes, the valve is suitable for hot water systems with a maximum operating temperature of 120°C, making it appropriate for domestic hot water and central heating applications.

Is the union nut removable without cutting the pipe?
Yes, the union nut allows for disassembly and removal of the valve without cutting the pipe, which is useful for maintenance or replacement in tight spaces.

What is the maximum pressure the valve can handle?
The valve has a nominal pressure rating of 30 bar, which means it is suitable for high-pressure systems such as pressurised hot water and central heating circuits.

Can the valve be used with plastic piping?
Yes, the valve is compatible with plastic piping systems as long as the connection is made using the G1 thread and the appropriate sealing materials are used.