Backup power supplies
Product sorting
List of products
The Avansa 500 W is a backup power supply designed for circulation pumps. It...
This backup power supply provides uninterrupted power to circulators in solid fuel...
The Avansa 700 W is a backup power supply suitable for heating circulators and...
Designed for heating systems requiring uninterrupted power, this backup power...
The GETI GEP300 is a backup power supply designed for installers and technicians...
The GETI GEP301 is a wall-mounted emergency power supply suitable for installers...
The GETI GEP500 sine 500W (800VA) is designed for installers and technicians...
The GETI GEP701 is a wall-mounted emergency power supply delivering 700W of pure...
The GETI GEP701LF is a wall-mounted backup power supply with pure sine wave...
Designed for heating systems and pumps, the KEMOT PROsinus-1000 1000VA 700W backup...
The KEMOT PROsinus-2000 is a backup power supply for heating equipment requiring...
The KEMOT PROsinus-2000 is a 1200W backup power supply for 12V DC battery systems,...
The KEMOT PROsinus-2000/24-LFP4 is a backup power supply designed for maintaining...
Designed for installers and technicians, the KEMOT PROsinus-2200 provides backup...
The KEMOT PROsinus-800 is a wall-mounted backup power supply designed for heating...
The GETI GEP301LF is a 300W sine wave backup power supply with 500VA capacity,...
The GETI GEP301LF is a wall-mounted backup power supply with a LiFePO4 100 Ah...
The GETI GEP701 is an emergency power supply designed for installers and...
The GETI GEP701LF is a 700W backup power supply with a pure sine wave inverter,...
Listing controls
Backup sources for central heating boilers and circulators. (APC and Lumar)
Backup source for gas boilers and circulation pumps should already be part of every boiler room. For one thing, they protect the boiler, the controls and the circulating pump against power surges, so they also provide surge protection and, most importantly, provide enough electricity to run for a few hours during a power outage. For wood or other fuel fired boilers this feature is very important. As the wood or coal in the boiler burns longer and cannot simply be shut down, it heats the boiler continuously and when the circulating pump stops, the boiler overheats within a few minutes. The high temperature in the boiler can cause welds to crack or even cause a fire in the boiler's external insulation. The circulation pump backup power supply will continue to drive the control or the circulation pump, thus avoiding such a problem. Some back-up power supplies also have a loud alarm function in the event of a power failure. Battery operation can be several hours, but this depends on the number of power points and the power of the device. All back-up power supplies include surge protection and one or two electrical outlets with a protective pin.