Mechanical insert 10" RL SX 50mcr washable

Product detailed description

Water supply systems in residential, commercial and industrial buildings often require initial filtration to prevent larger particulate matter from damaging downstream components. The RL SX 50mcr filter insert is designed for installation in the main water supply line to capture mechanical impurities before they reach sensitive equipment such as heat exchangers, pumps or domestic appliances. This insert is particularly useful in systems where water quality is variable or where additional filtration stages are planned for finer filtration.

Typical installation scenarios include pre-filtration in heating systems, irrigation systems, and domestic water supply lines. The insert is often used as the first stage in multi-stage filtration systems to reduce the load on finer filters and extend their service life. It is suitable for use in systems with moderate particulate contamination and where regular maintenance is feasible.

Technical parameters

EAN	8021647020345
Weight	0.5 kg
Code	PR_17011
Brand	Atlas Filtri

The RL SX 50mcr filter insert is rated for a maximum temperature of 45°C and a maximum flow rate of 2500 l/h. These parameters are essential for sizing the filter in relation to the system's flow requirements and thermal conditions. The 50mcr filtration rating ensures that particles larger than this size are captured, making it suitable for coarse filtration stages. The dimensions (250 x 70 x 30 mm) are important for ensuring compatibility with standard filter housings and installation space.

Installation and connection

The RL SX 50mcr insert is installed inside a compatible filter housing connected to the main water supply line. The housing should be positioned before or after the pump, depending on the system configuration. The installation procedure involves securing the filter housing to the pipeline using standard pipe connections. It is important to ensure that the housing is fully sealed and that the flow direction is correct, as indicated by the manufacturer's markings. Common installation errors include incorrect orientation, insufficient sealing, or failure to align the filter with the system's flow direction.

Compatibility and accessories

The RL SX 50mcr insert is compatible with standard filter housings designed for 10-inch mechanical filters. For systems requiring higher filtration efficiency, it is recommended to install the ATLAS DUO filter with a second mechanical insert of a finer rating (e.g., 25, 5, or 1 mcr). Additional components such as filter housings, sealing rings, and mounting brackets may be required for full installation. The insert is not a complete filter system and must be used in conjunction with a suitable housing and piping configuration.

Technical background for designers

The RL SX 50mcr filter insert operates by capturing solid particles larger than 50 microns in a polyester mesh. The polypropylene housing ensures resistance to corrosion and chemical degradation, making it suitable for use in a range of water conditions. The insert is designed to be cleaned and reused, reducing the need for frequent replacements. The filtration efficiency is influenced by the water flow rate, particle size distribution, and the frequency of cleaning. The insert should be integrated into the system upstream of more sensitive components to prevent premature clogging and reduce maintenance requirements.

Service and operation

The RL SX 50mcr filter insert requires regular maintenance to ensure optimal performance. It should be cleaned every three months to remove accumulated particulate matter. The service life of the insert is up to 24 months, after which it should be replaced. During cleaning, the filter housing should be depressurised and the insert removed for inspection. Any signs of wear or damage should be addressed immediately to prevent system contamination. Regular checks should include verifying the integrity of the housing seals and ensuring that the filter is functioning within its rated flow and temperature limits.

Frequently asked questions

Can the RL SX 50mcr insert be used in high-temperature systems?
No, the insert is rated for a maximum temperature of 45°C. It is not suitable for systems with higher thermal loads.

Is the RL SX 50mcr insert compatible with all filter housings?
The insert is designed for 10-inch filter housings. It is important to verify housing compatibility before installation.

How often should the RL SX 50mcr insert be cleaned?
The insert should be cleaned every three months to maintain filtration efficiency and prevent clogging.

Can the RL SX 50mcr insert be used in multi-stage filtration systems?
Yes, it is commonly used as the first stage in multi-stage systems to reduce the load on finer filters and extend their service life.