Installation kit for softeners IVAR.DEVAP - action – SALE IVAR.DEVAP-KIT

Product detailed description

This installation kit is intended for the setup of IVAR.DEVAP water softening units in residential and commercial properties where water hardness reduction is required. It supports both time-based and demand-based regeneration cycles. The system integrates with standard domestic water supply lines and requires connection to a drainage point and a 230 V power supply. The compact design suits installations in mechanical rooms, basements or utility areas where space is limited.

The kit ensures correct alignment of all components during installation and facilitates the integration of the softener into existing plumbing systems. The full-electronic control unit allows for precise programming to match local water conditions and usage patterns. The bypass function allows continued water flow during maintenance or servicing.

Technical parameters

Code	IVA.DEVAP.KIT1
Brand	IVAR

The technical parameters determine the suitability of the installation kit for specific water hardness levels and flow rates. The programmable control unit allows for customisation of regeneration cycles based on water consumption data. The compact salt tank size is optimised for regular maintenance intervals, ensuring consistent performance over time.

Installation and connection

The installation procedure begins with verifying the location for accessibility and drainage requirements. The softener must be connected to a non-potable drainage point and a 230 V AC power supply. Threaded connections are used for the inlet and outlet pipes, and all joints must be sealed with plumber’s tape or equivalent. A bypass valve should be installed to allow water flow during servicing. Key checkpoints include confirming the correct orientation of the salt tank, ensuring the drain line is free of kinks, and testing the control unit for proper response to programmed settings. Common installation errors include incorrect thread sealing, failure to align the bypass correctly, and improper grounding of the electrical supply.

Compatibility and accessories

This installation kit is specifically designed for use with IVAR.DEVAP water softening units. Additional components such as pressure gauges, flow meters or expansion tanks may be required depending on the system configuration and local regulations. All electrical and hydraulic components must be compatible with the unit's specifications to ensure safe and efficient operation.

Technical background for designers

The IVAR.DEVAP system operates using ion exchange technology to remove calcium and magnesium ions from water. The resin bed inside the softener exchanges these ions with sodium ions from the brine solution in the salt tank. The full-electronic control unit manages the regeneration process based on pre-set parameters. The materials used are resistant to corrosion and chemical exposure, ensuring long-term reliability. The system integrates with standard domestic water supply lines and requires sufficient space for the salt tank and control unit. The efficiency of the system depends on the quality of the resin, the accuracy of the control programming and the frequency of salt replenishment. Proper sizing of the unit is essential to avoid under-treatment or excessive salt and water consumption.

Service and operation

Regular maintenance includes checking and refilling the salt tank, inspecting the resin bed for signs of contamination and verifying the functionality of the control unit. The bypass valve should be tested periodically to ensure it operates smoothly. Any blockages in the drain line or irregularities in the regeneration cycle should be addressed immediately to prevent system failure.

Frequently asked questions

Can the IVAR.DEVAP system be installed in a basement?
Yes, provided there is access to a drainage point and a 230 V power supply. Ensure the location is dry and well-ventilated to avoid condensation issues.

Is the control unit programmable for different water usage patterns?
Yes, the full-electronic control unit can be configured for either time-based or demand-based regeneration, depending on the user's water consumption habits.

Can the salt tank be replaced separately?
Yes, the compact salt tank is designed for easy replacement when necessary. Ensure the new tank is compatible with the existing control system and resin bed.

How is the bypass function activated?
The bypass function is manually operated via a dedicated valve. It allows water to bypass the softener during maintenance or servicing without interrupting the water supply.