Neutralising filter - for condensing boilers up to 800kW - 5/4" - action – SALE IVAR.NEUTRO AA
Code: IVANEUTROAARelated products
Product detailed description
Neutralising filters are essential components in condensing boiler systems where acidic condensate is a by-product of combustion. This model is suitable for installations in commercial and industrial buildings with condensing boilers rated up to 800kW. It is typically used in central heating systems where condensate must be neutralised before disposal to prevent corrosion and environmental issues. The unit is installed in the condensate drainage path and requires a minimum vertical drop of 180 mm between the boiler outlet and the filter to ensure gravity flow.
Installers working on such systems must ensure proper sizing and positioning to maintain system efficiency and compliance with local regulations. The unit is designed for straightforward integration into existing condensate management systems, with no electrical requirements and minimal maintenance needs.
Technical parameters
| Dimensions | length x width x height – 563 x 308 x 220 mm |
|---|---|
| Weight with cartridge | approximately 23 kg |
| For condensing boilers up to | 800 kW |
| Code | IVANEUTROAA |
| Brand | IVAR |
Installation and connection
The filter must be installed with a vertical drop of more than 180 mm between the boiler's condensate outlet and the filter inlet to ensure gravity flow. Connect using 5/4 inch fittings compatible with the system's piping. Ensure the inlet and outlet connections are correctly aligned and sealed to prevent leaks. A common mistake is insufficient vertical drop, which can lead to poor flow and reduced neutralisation efficiency. Always verify the direction of flow indicated on the unit before securing the connections.Compatibility and accessories
This filter is specifically designed for condensing boilers and is compatible with standard condensate drainage systems. No additional accessories are required for basic operation. It is important to ensure the boiler system is correctly sized and that the condensate flow rate does not exceed the filter's capacity. No related products are available for this model.Technical background for designers
The filter operates by passing acidic condensate through a cartridge filled with an alkaline medium, which neutralises the pH to a safe level for disposal. The plastic housing is resistant to corrosion and chemical exposure, ensuring long-term durability. The unit is designed for integration into condensing boiler systems with no electrical components, relying solely on gravity for flow. The efficiency of the unit depends on the flow rate and the acidity level of the condensate. A minimum vertical drop is required to maintain consistent flow and prevent backflow or clogging.Service and operation
The unit requires periodic inspection of the alkaline medium cartridge for signs of saturation or blockage. Replace the cartridge when the neutralisation efficiency decreases, typically indicated by a drop in pH levels of the outgoing condensate. No specific service intervals are provided in the technical data. Ensure the unit is accessible for maintenance and that the connections remain secure to prevent leaks or bypassing of the neutralisation process.Frequently asked questions
Can this filter be used with condensing boilers rated above 800kW?
No, the unit is designed for condensing boilers up to 800kW. Exceeding this rating may result in insufficient neutralisation capacity.
Is an electrical connection required for this filter?
No, the filter operates using gravity flow and does not require an electrical connection.
What is the minimum vertical drop required for installation?
The height difference between the boiler outlet and the filter inlet must be greater than 180 mm to ensure proper flow.
Can this filter be installed horizontally?
No, the unit relies on gravity for flow and must be installed with a vertical drop as specified.
Documents for download
Additional parameters
| Category: | Neutralization filters |
|---|---|
| Weight: | 27 kg |
| Product type: | filter / dirt separator |
| Thread size: | 5/4" |
| Dimensions: | length x width x height – 563 x 308 x 220 mm |
| For condensing boilers up to: | 800 kW |
| Weight when filled approx.: | 23 kg |
| Posledná aktuálizacia ceny: | 09.07.2026 12:27:12 |
Discussion
Be the first who will post an article to this item!